A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Owning
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Century 2000 altitude hold issue...



 
 
Thread Tools Display Modes
  #1  
Old July 8th 07, 09:43 PM posted to rec.aviation.owning
Dico
external usenet poster
 
Posts: 27
Default Century 2000 altitude hold issue...

Hello All,

Just the past couple flights we've had an issue with the altitude hold
-- it doesn't work anymore. When pressed, the plane pitches up to
about 1500ft/min climb rate.

After flying around for 10 minutes and trying it again the plane would
only pitch up about 500' per min. After about 15 minutes the plane
would vary -200/+200'/minute. Obviously not ideal so we should get it
fixed.

Just wondering if anyone has heard of this before and who ended up
fixing it. I don't want to send this to our local shop where they
don't have any Century AP experience and pay for them to gain this
experience. Rather send it to a shop that knows these APs and can fix
it properly.

Any ideas and names of shops would be appreciated.

Thanks,

Dico

  #2  
Old July 8th 07, 11:00 PM posted to rec.aviation.owning
Jim Burns
external usenet poster
 
Posts: 259
Default Century 2000 altitude hold issue...

Call Autopilots Central, talk to Bob Ferguson. (918) 836-6418
Jim


"Dico" wrote in message
ups.com...
Hello All,

Just the past couple flights we've had an issue with the altitude hold
-- it doesn't work anymore. When pressed, the plane pitches up to
about 1500ft/min climb rate.

After flying around for 10 minutes and trying it again the plane would
only pitch up about 500' per min. After about 15 minutes the plane
would vary -200/+200'/minute. Obviously not ideal so we should get it
fixed.

Just wondering if anyone has heard of this before and who ended up
fixing it. I don't want to send this to our local shop where they
don't have any Century AP experience and pay for them to gain this
experience. Rather send it to a shop that knows these APs and can fix
it properly.

Any ideas and names of shops would be appreciated.

Thanks,

Dico



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
More stories of long FSS hold times and another issue Peter R. Piloting 30 May 15th 07 04:28 AM
Century 2000 + GNS430 newbie question [email protected] Piloting 2 October 2nd 06 02:19 PM
Century 2000 vs. S-TEC 65 Dico Owning 2 April 19th 06 07:15 AM
Pressure Altitude or Density Altitude john smith Piloting 3 July 22nd 04 10:48 AM
S-TEC 60-2 requires re-trim after altitude hold? Peter R. Owning 7 March 2nd 04 03:46 PM


All times are GMT +1. The time now is 10:12 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.