A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Owning
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

t-hangar and ice



 
 
Thread Tools Display Modes
  #11  
Old October 16th 04, 04:07 PM
john smith
external usenet poster
 
Posts: n/a
Default

If you get crushed limestone, water and pressure (roll it) will cause it
to compact into a solid mass.

Jay Honeck wrote:
Get a couple bags of pea gravel and sand, spread it in the low spot to
deflect the water away from the hangar.



Under NO circumstances should you spread pea gravel or sand in front of your
hangar door.

Our hangar neighbor did that last year, and that damned stuff ended up all
over our tarmac. Can you say "sandblasted"?

You can get the same result with a few bags of asphalt patch, which is more
durable and won't blow away.


  #12  
Old October 19th 04, 02:02 PM
OtisWinslow
external usenet poster
 
Posts: n/a
Default

Sprinkle ice melt on the floor. I just buy the big bags and keep it
in a 5 gal bucket with a scoop.



"Bob Noel" wrote in message
...

In preparation for winter, I have a question.

the situation: T-hangar with bi-fold doors. Run-off from the roof
collects in front of the hangar door (because the tarmac doesn't
slope away from the hangar - in fact there is a slight dip in
front of the hangar). In the winter, water collects and then
freezes. Eventually the water penetrates under the door and
freezes inside the hangar. The result is a patch of ice about
4 to 6 feet wide, about half inside and half outside the door.
(imagine walking into a dark hangar and having black ice just
inside the door - weeeeee!!! splat!)

The best that Massport has come up with to date is to leave
the door slightly up so that the door won't freeze to the ground.
This does nothing with respect to being able to push/pull the
airplane in/out of the hangar.

Are there any suggestions on how to deal with ice in front
of the door?

--
Bob Noel
Seen on Kerry's campaign airplane: "the real deal"
oh yeah baby.



  #13  
Old October 19th 04, 02:37 PM
Jay Honeck
external usenet poster
 
Posts: n/a
Default

Sprinkle ice melt on the floor. I just buy the big bags and keep it
in a 5 gal bucket with a scoop.


???

What kind of ice melt can you use around your plane?

The only stuff I've seen eats aluminum.
--
Jay Honeck
Iowa City, IA
Pathfinder N56993
www.AlexisParkInn.com
"Your Aviation Destination"


  #14  
Old October 19th 04, 09:59 PM
Bob Noel
external usenet poster
 
Posts: n/a
Default

In article , "OtisWinslow"
wrote:

Sprinkle ice melt on the floor. I just buy the big bags and keep it
in a 5 gal bucket with a scoop.



what kind of ice melt?

--
Bob Noel
Seen on Kerry's campaign airplane: "the real deal"
oh yeah baby.
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 08:19 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.