A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Owning
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

AvTek Pulsar Installation PIREP (or "Why I'm Not an A&P")



 
 
Thread Tools Display Modes
  #1  
Old October 23rd 07, 04:26 AM posted to rec.aviation.owning
Jay Honeck
external usenet poster
 
Posts: 3,573
Default AvTek Pulsar Installation PIREP (or "Why I'm Not an A&P")

http://www.alexisparkinn.com/avtek_p...stallation.htm

:-)
--
Jay Honeck
Iowa City, IA
Pathfinder N56993
www.AlexisParkInn.com
"Your Aviation Destination"

  #2  
Old October 23rd 07, 06:12 AM posted to rec.aviation.owning
Jack Allison
external usenet poster
 
Posts: 173
Default AvTek Pulsar Installation PIREP (or "Why I'm Not an A&P")

Aw...I wanted to see a video of the UFO...I mean Atlas...coming in for a
night landing :-)


--
Jack Allison
PP-ASEL-Instrument Airplane

"To become a Jedi knight, you must master a single force. To become
a private pilot you must strive to master four of them"
- Rod Machado

(Remove the obvious from address to reply via e-mail)
  #3  
Old October 23rd 07, 12:54 PM posted to rec.aviation.owning
Jay Honeck
external usenet poster
 
Posts: 3,573
Default AvTek Pulsar Installation PIREP (or "Why I'm Not an A&P")

Aw...I wanted to see a video of the UFO...I mean Atlas...coming in for a
night landing :-)


I'll see what I can do...

;-)
--
Jay Honeck
Iowa City, IA
Pathfinder N56993
www.AlexisParkInn.com
"Your Aviation Destination"

  #4  
Old October 23rd 07, 06:35 PM posted to rec.aviation.owning
Jim Stewart
external usenet poster
 
Posts: 437
Default AvTek Pulsar Installation PIREP (or "Why I'm Not an A&P")

Jay Honeck wrote:
http://www.alexisparkinn.com/avtek_p...stallation.htm


I'm sure there's more than a few A&P's that could
write a "Why I'm not an Innkeeper" story (:

  #5  
Old October 27th 07, 03:27 PM posted to rec.aviation.owning
Viperdoc
external usenet poster
 
Posts: 155
Default AvTek Pulsar Installation PIREP (or "Why I'm Not an A&P")

Is it my impression, or do even the simplest appearing jobs take a lot
longer than they first appear? Items that are supposed to be "bolt in"
replacements don't fit, screw holes don't line up, etc.

Installing HID lights in my plane took four hours, even though it only
involved two wires and didn't involve any metal bending or other
replacements.

I have a tool box with some great Snap On and Craftsman stuff, but I always
think twice before doing anything. It seems easy to get stuff apart, but
putting things back together in a working fashion is apparently a different
story!

Do other owner/pilots see the same thing? I am just hesitant to dive in and
start taking things apart.


  #6  
Old October 27th 07, 04:47 PM posted to rec.aviation.owning
Dave Butler
external usenet poster
 
Posts: 147
Default AvTek Pulsar Installation PIREP (or "Why I'm Not an A&P")

Viperdoc wrote:
Is it my impression, or do even the simplest appearing jobs take a lot
longer than they first appear? Items that are supposed to be "bolt in"
replacements don't fit, screw holes don't line up, etc.


http://en.wikipedia.org/wiki/Hofstadter's_law
  #7  
Old October 27th 07, 06:10 PM posted to rec.aviation.owning
Blueskies
external usenet poster
 
Posts: 979
Default AvTek Pulsar Installation PIREP (or "Why I'm Not an A&P")


"Dave Butler" wrote in message ...
Viperdoc wrote:
Is it my impression, or do even the simplest appearing jobs take a lot longer than they first appear? Items that are
supposed to be "bolt in" replacements don't fit, screw holes don't line up, etc.


http://en.wikipedia.org/wiki/Hofstadter's_law


Yep, pretty much everything takes twice as long as I expect, even when I expect it to take twice as long as I
expected....


  #8  
Old October 28th 07, 02:39 AM posted to rec.aviation.owning
Jay Honeck
external usenet poster
 
Posts: 3,573
Default AvTek Pulsar Installation PIREP (or "Why I'm Not an A&P")

Yep, pretty much everything takes twice as long as I expect, even when I expect it to take twice as long as I
expected....


You're talking to the guy who has yet to complete his three-year hotel
remodeling plan. We celebrated our fifth anniversary in August...

;-)
--
Jay Honeck
Iowa City, IA
Pathfinder N56993
www.AlexisParkInn.com
"Your Aviation Destination"

  #9  
Old October 28th 07, 02:09 PM posted to rec.aviation.owning
Mike Spera
external usenet poster
 
Posts: 220
Default Was: "Why I'm Not an A&P" - Now: Fixin' Stuff


Is it my impression, or do even the simplest appearing jobs take a lot
longer than they first appear? Items that are supposed to be "bolt in"
replacements don't fit, screw holes don't line up, etc.

Installing HID lights in my plane took four hours, even though it only
involved two wires and didn't involve any metal bending or other
replacements.

I have a tool box with some great Snap On and Craftsman stuff, but I always
think twice before doing anything. It seems easy to get stuff apart, but
putting things back together in a working fashion is apparently a different
story!

Do other owner/pilots see the same thing? I am just hesitant to dive in and
start taking things apart.



I have lived a life repairing, building, and installing things. My
earliest jobs were at machine shops as a fabricator and assembler. I did
sound systems for rock n' roll bands for 12 years. On the road, I fixed
everything from the tour busses to the lighting/sound systems to the
rental cars. My dad owned a body shop for 22 years and I worked there
doing body work, painting, mechanical work, fiberglass repair, stereos,
and interiors. At home I do all the plumbing/electrical/carpentry/etc.
Around 1985 I got involved with repairing computers and did so until
today. I am the family "go to guy" whenever anything breaks. If I don't
fix it, I give them the rundown on what is involved and all the ways the
repairman can screw them. 13 years ago we bought the airplane and I
pretty much did everything in partnership with a mechanic (including
painting the beast and redoing the interior).

In my youth I used to attack every job fearlessly and think it would
take little time to get things apart, fixed, and put back together (and
was seldom wrong). Cars and other mechanical stuff were simpler then. I
now find that the opposite is true for me. I look at any job and figure
out EVERY step, tool, process, and nuance. I go over it again and again
replaying the job in my mind for a day or more before doing it. I try to
anticipate and prepare for EVERY oddball thing that might come up. I
have a plan B... and C... and D. I estimate wildly in excess of what it
actually will take.

In the end, I breeze through most operations pretty well unscathed. But,
as I got older, my experience in doing things made me much more hesitant
to start things. I farm out the knuckle busting garbage I would never
consider letting anyone else do a few years ago. Having a few more
dollars in the kitty to do so makes this more and more attractive. I
actually TOOK MY CAR TO THE DEALER AND PAID OFF-THE-RACK PRICES!! Even
though I had all the OEM parts and special tools lined up, I anticipated
many potential pitfalls and decided to let the local Audi dealer tackle
the job (bumper off, core support back to the "service" position, timing
belt, water pump, cam/crank seals, valve cover gasket, tensioners,
idlers, etc.). I did this job on nearly every car I have owned before.
Not this time. The personal satisfaction of doing the job would be
offset by the nagging feeling that something may have been overlooked or
improperly done. If that nice new timing belt breaks and YOU put it on,
so sorry, here is a new belt. Too bad you have to do a $4000 valve job
because our part was defective out of the box. Now, if the job blows up,
I actually have a warranty for 12 months.

I have now done enough work that I know better when to walk away and let
someone do it who does it all day. Yeah, I hate it when they take 4
hours and charge me 9 because that is the "book price". But it would
take me 6-8 hours IF everything went as planned.

I think the reason a lot of nonprofessional mechanics always
underestimate is because they really don't have an extensive background
to anticipate problems. They also seldom have the extensive special
tools required. Also, I believe many things are much more difficult or
impossible to repair outside a specialty shop. Many electronic "modules"
can only be "tested" by swapping them out with known good units. Many
internals of things are made of crappy plastic that cannot be repaired.
Parts are hard to get for things unless you are an "authorized" repair
shop. Hell, they are talking about banning the sale of water heaters to
the public because we might hurt ourselves. What crap. The stupid ones
are SUPPOSED to get bumped off. Its natural selection. This is AMERICA
dammit! I have the RIGHT to kill myself!!!!! But I digress.

To all those brave souls who blindly tackle a job, I say "Go get 'em".
Ya never know until you try. When you do so on an airplane though, I ask
that you please work with a wrench to keep from making your passengers
very much dead.

Good Luck,
Mike
  #10  
Old October 28th 07, 06:07 PM posted to rec.aviation.owning
nrp
external usenet poster
 
Posts: 128
Default Was: "Why I'm Not an A&P" - Now: Fixin' Stuff

Mike - Obviously you have a lot of experience that yet may make you
change your mind a little the first time you encounter a stripped
drain plug (who in hell put in that rubber plug?) in that Audi!
NRP

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
The Good, the Bad, the Ugly: AirGizmo PIREP, PS Engineering CD/Intercom woes, XM "service" Jay Honeck Owning 34 December 15th 06 04:02 AM
Old polish aircraft TS-8 "Bies" ("Bogy") - for sale >pk Aviation Marketplace 0 October 16th 06 07:48 AM


All times are GMT +1. The time now is 09:13 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.