Do you own an IMI Power Rigger?

I'm considering the purchase of an IMI Power Rigger. If you own one I would very much appreciate information about your experience with it.

Bill

At 10:35 26 May 2020, William Kautter wrote:
I'm considering the purchase of an IMI Power Rigger. If you own
one I would
very much appreciate information about your experience with it.

Bill
I have owned a manual Cobra rigger and two different electric
Cobra riggers. I now have an IMI Power Rigger which is very good
indeed, reflecting the fact that it’s design is 20 years or so later
than the Cobras.

Mike

Just purchased one recently, only used it once but the experience was very nice, outstanding quality.
It is considerably heavier than my old Udo Rumph self rigger but than it's to be expected given the extra hardware.
I absolutely love the larger balloon tires on rough surface I have to rig on.
I also like the extent of the saddle travel in the up and down movement, much better than the Udo self rig.

On Tuesday, May 26, 2020 at 3:35:13 AM UTC-7, William Kautter wrote:
I'm considering the purchase of an IMI Power Rigger. If you own one I would very much appreciate information about your experience with it.

Bill

Wings & Wheels has a video that shows how it works. I have one and it works great except for ONE thing: if you leave it on, or you don't use it over the winter, the battery will die and you are dead in the water, most likely at the time you REALLY want to use it. You fix this by:
1. Buying a 2nd battery.
2. Buying a mating battery connector so you can power it from another battery (someone posted a link where you can buy the connector).
It's rated to lift something like 250 lbs (IF the battery is good and charged). I had no problem with my ASH31Mi inner wing panels. The quality of construction is absolutely excellent (CNC machined parts, for example). The tires are solid rubber, so no flat tires at the start of the season (been there, done that). Being able to tweak the wing position remotely while searching for the exact alignment position is a major plus. I need to come up with a method of preventing the first wing from being pushed out by the second wing, but this is no fault of the rigger.

My only complaint is it is a bit on the pricey side, but I think you get what you pay for.

Tom

On Tuesday, May 26, 2020 at 6:47:45 PM UTC-7, 2G wrote:
On Tuesday, May 26, 2020 at 3:35:13 AM UTC-7, William Kautter wrote:
I'm considering the purchase of an IMI Power Rigger. If you own one I would very much appreciate information about your experience with it.

Bill

Wings & Wheels has a video that shows how it works. I have one and it works great except for ONE thing: if you leave it on, or you don't use it over the winter, the battery will die and you are dead in the water, most likely at the time you REALLY want to use it. You fix this by:
1. Buying a 2nd battery.
2. Buying a mating battery connector so you can power it from another battery (someone posted a link where you can buy the connector).
It's rated to lift something like 250 lbs (IF the battery is good and charged). I had no problem with my ASH31Mi inner wing panels. The quality of construction is absolutely excellent (CNC machined parts, for example). The tires are solid rubber, so no flat tires at the start of the season (been there, done that). Being able to tweak the wing position remotely while searching for the exact alignment position is a major plus. I need to come up with a method of preventing the first wing from being pushed out by the second wing, but this is no fault of the rigger.

My only complaint is it is a bit on the pricey side, but I think you get what you pay for.

Tom

"" if you leave it on, or you don't use it over the winter, the battery will die and you are dead in the water""
These are NiCad batteries. Playing with model airplanes a long while ago, the rule was to always charge the batteries before and after and also cycle them to prevent a memory built up. Although I don't have a battery cycler any longer the next best thing is to run them down to "almost" all the way time to time and charge them back up. I kind of whish they offered these units with the newer lithium ion stuff through...

On Tuesday, May 26, 2020 at 7:12:20 PM UTC-7, 6PK wrote:
On Tuesday, May 26, 2020 at 6:47:45 PM UTC-7, 2G wrote:
On Tuesday, May 26, 2020 at 3:35:13 AM UTC-7, William Kautter wrote:
I'm considering the purchase of an IMI Power Rigger. If you own one I would very much appreciate information about your experience with it.

Bill

Wings & Wheels has a video that shows how it works. I have one and it works great except for ONE thing: if you leave it on, or you don't use it over the winter, the battery will die and you are dead in the water, most likely at the time you REALLY want to use it. You fix this by:
1. Buying a 2nd battery.
2. Buying a mating battery connector so you can power it from another battery (someone posted a link where you can buy the connector).
It's rated to lift something like 250 lbs (IF the battery is good and charged). I had no problem with my ASH31Mi inner wing panels. The quality of construction is absolutely excellent (CNC machined parts, for example). The tires are solid rubber, so no flat tires at the start of the season (been there, done that). Being able to tweak the wing position remotely while searching for the exact alignment position is a major plus. I need to come up with a method of preventing the first wing from being pushed out by the second wing, but this is no fault of the rigger.

My only complaint is it is a bit on the pricey side, but I think you get what you pay for.

Tom

"" if you leave it on, or you don't use it over the winter, the battery will die and you are dead in the water""
These are NiCad batteries. Playing with model airplanes a long while ago, the rule was to always charge the batteries before and after and also cycle them to prevent a memory built up. Although I don't have a battery cycler any longer the next best thing is to run them down to "almost" all the way time to time and charge them back up. I kind of whish they offered these units with the newer lithium ion stuff through...

No, they aren't NICADs - the IMI uses a 2.9 AHr SLA battery which self-discharge over a number of months.

Tom

At 03:30 27 May 2020, 2G wrote:
On Tuesday, May 26, 2020 at 7:12:20 PM UTC-7, 6PK wrote:
On Tuesday, May 26, 2020 at 6:47:45 PM UTC-7, 2G wrote:
On Tuesday, May 26, 2020 at 3:35:13 AM UTC-7, William
Kautter wrote:
I'm considering the purchase of an IMI Power Rigger. If
you own one
I=
would very much appreciate information about your experience
with it.
=20
Bill
=20
Wings & Wheels has a video that shows how it works. I have
one and it
w=
orks great except for ONE thing: if you leave it on, or you don't
use it
ov=
er the winter, the battery will die and you are dead in the water,
most
lik=
ely at the time you REALLY want to use it. You fix this by:
1. Buying a 2nd battery.
2. Buying a mating battery connector so you can power it
from another
b=
attery (someone posted a link where you can buy the
connector).
It's rated to lift something like 250 lbs (IF the battery is
good and
c=
harged). I had no problem with my ASH31Mi inner wing panels.
The quality
of=
construction is absolutely excellent (CNC machined parts, for
example).
Th=
e tires are solid rubber, so no flat tires at the start of the season
(been=
there, done that). Being able to tweak the wing position
remotely while
se=
arching for the exact alignment position is a major plus. I need
to come
up=
with a method of preventing the first wing from being pushed
out by the
se=
cond wing, but this is no fault of the rigger.
=20
My only complaint is it is a bit on the pricey side, but I think
you
ge=
t what you pay for.
=20
Tom
=20
"" if you leave it on, or you don't use it over the winter, the
battery
w=
ill die and you are dead in the water""
These are NiCad batteries. Playing with model airplanes a long
while
ago,=
the rule was to always charge the batteries before and after and
also
cycl=
e them to prevent a memory built up. Although I don't have a
battery
cycler=
any longer the next best thing is to run them down to "almost"
all the
way=
time to time and charge them back up. I kind of whish they
offered these
u=
nits with the newer lithium ion stuff through...

No, they aren't NICADs - the IMI uses a 2.9 AHr SLA battery
which
self-disc=
harge over a number of months.

Tom


And the tyres are inflatable, not solid. Would be rather heavy to
lift into the trailer if the tyres were solid. All this is in the
description on the IMI website anyway.

Mike

On Tuesday, May 26, 2020 at 8:30:14 PM UTC-7, 2G wrote:
On Tuesday, May 26, 2020 at 7:12:20 PM UTC-7, 6PK wrote:
On Tuesday, May 26, 2020 at 6:47:45 PM UTC-7, 2G wrote:
On Tuesday, May 26, 2020 at 3:35:13 AM UTC-7, William Kautter wrote:
I'm considering the purchase of an IMI Power Rigger. If you own one I would very much appreciate information about your experience with it.

Bill

Wings & Wheels has a video that shows how it works. I have one and it works great except for ONE thing: if you leave it on, or you don't use it over the winter, the battery will die and you are dead in the water, most likely at the time you REALLY want to use it. You fix this by:
1. Buying a 2nd battery.
2. Buying a mating battery connector so you can power it from another battery (someone posted a link where you can buy the connector).
It's rated to lift something like 250 lbs (IF the battery is good and charged). I had no problem with my ASH31Mi inner wing panels. The quality of construction is absolutely excellent (CNC machined parts, for example). The tires are solid rubber, so no flat tires at the start of the season (been there, done that). Being able to tweak the wing position remotely while searching for the exact alignment position is a major plus. I need to come up with a method of preventing the first wing from being pushed out by the second wing, but this is no fault of the rigger.

My only complaint is it is a bit on the pricey side, but I think you get what you pay for.

Tom

"" if you leave it on, or you don't use it over the winter, the battery will die and you are dead in the water""
These are NiCad batteries. Playing with model airplanes a long while ago, the rule was to always charge the batteries before and after and also cycle them to prevent a memory built up. Although I don't have a battery cycler any longer the next best thing is to run them down to "almost" all the way time to time and charge them back up. I kind of whish they offered these units with the newer lithium ion stuff through...

No, they aren't NICADs - the IMI uses a 2.9 AHr SLA battery which self-discharge over a number of months.

Tom
My mistake, you are absolutely correct I just confirmed it too..

On Wednesday, May 27, 2020 at 6:15:04 AM UTC-7, Mike Clarke wrote:
At 03:30 27 May 2020, 2G wrote:
On Tuesday, May 26, 2020 at 7:12:20 PM UTC-7, 6PK wrote:
On Tuesday, May 26, 2020 at 6:47:45 PM UTC-7, 2G wrote:
On Tuesday, May 26, 2020 at 3:35:13 AM UTC-7, William
Kautter wrote:
I'm considering the purchase of an IMI Power Rigger. If
you own one
I=
would very much appreciate information about your experience
with it.
=20
Bill
=20
Wings & Wheels has a video that shows how it works. I have
one and it
w=
orks great except for ONE thing: if you leave it on, or you don't
use it
ov=
er the winter, the battery will die and you are dead in the water,
most
lik=
ely at the time you REALLY want to use it. You fix this by:
1. Buying a 2nd battery.
2. Buying a mating battery connector so you can power it
from another
b=
attery (someone posted a link where you can buy the
connector).
It's rated to lift something like 250 lbs (IF the battery is
good and
c=
harged). I had no problem with my ASH31Mi inner wing panels.
The quality
of=
construction is absolutely excellent (CNC machined parts, for
example).
Th=
e tires are solid rubber, so no flat tires at the start of the season
(been=
there, done that). Being able to tweak the wing position
remotely while
se=
arching for the exact alignment position is a major plus. I need
to come
up=
with a method of preventing the first wing from being pushed
out by the
se=
cond wing, but this is no fault of the rigger.
=20
My only complaint is it is a bit on the pricey side, but I think
you
ge=
t what you pay for.
=20
Tom
=20
"" if you leave it on, or you don't use it over the winter, the
battery
w=
ill die and you are dead in the water""
These are NiCad batteries. Playing with model airplanes a long
while
ago,=
the rule was to always charge the batteries before and after and
also
cycl=
e them to prevent a memory built up. Although I don't have a
battery
cycler=
any longer the next best thing is to run them down to "almost"
all the
way=
time to time and charge them back up. I kind of whish they
offered these
u=
nits with the newer lithium ion stuff through...

No, they aren't NICADs - the IMI uses a 2.9 AHr SLA battery
which
self-disc=
harge over a number of months.

Tom


And the tyres are inflatable, not solid. Would be rather heavy to
lift into the trailer if the tyres were solid. All this is in the
description on the IMI website anyway.

Mike

Yeah, it was the wing wheel I got from Craggy Aero that has a solid tire.

Tom

On Wednesday, May 27, 2020 at 6:15:04 AM UTC-7, Mike Clarke wrote:
At 03:30 27 May 2020, 2G wrote:
On Tuesday, May 26, 2020 at 7:12:20 PM UTC-7, 6PK wrote:
On Tuesday, May 26, 2020 at 6:47:45 PM UTC-7, 2G wrote:
On Tuesday, May 26, 2020 at 3:35:13 AM UTC-7, William
Kautter wrote:
I'm considering the purchase of an IMI Power Rigger. If
you own one
I=
would very much appreciate information about your experience
with it.
=20
Bill
=20
Wings & Wheels has a video that shows how it works. I have
one and it
w=
orks great except for ONE thing: if you leave it on, or you don't
use it
ov=
er the winter, the battery will die and you are dead in the water,
most
lik=
ely at the time you REALLY want to use it. You fix this by:
1. Buying a 2nd battery.
2. Buying a mating battery connector so you can power it
from another
b=
attery (someone posted a link where you can buy the
connector).
It's rated to lift something like 250 lbs (IF the battery is
good and
c=
harged). I had no problem with my ASH31Mi inner wing panels.
The quality
of=
construction is absolutely excellent (CNC machined parts, for
example).
Th=
e tires are solid rubber, so no flat tires at the start of the season
(been=
there, done that). Being able to tweak the wing position
remotely while
se=
arching for the exact alignment position is a major plus. I need
to come
up=
with a method of preventing the first wing from being pushed
out by the
se=
cond wing, but this is no fault of the rigger.
=20
My only complaint is it is a bit on the pricey side, but I think
you
ge=
t what you pay for.
=20
Tom
=20
"" if you leave it on, or you don't use it over the winter, the
battery
w=
ill die and you are dead in the water""
These are NiCad batteries. Playing with model airplanes a long
while
ago,=
the rule was to always charge the batteries before and after and
also
cycl=
e them to prevent a memory built up. Although I don't have a
battery
cycler=
any longer the next best thing is to run them down to "almost"
all the
way=
time to time and charge them back up. I kind of whish they
offered these
u=
nits with the newer lithium ion stuff through...

No, they aren't NICADs - the IMI uses a 2.9 AHr SLA battery
which
self-disc=
harge over a number of months.

Tom


And the tyres are inflatable, not solid. Would be rather heavy to
lift into the trailer if the tyres were solid. All this is in the
description on the IMI website anyway.

Mike

Yeah, it was the wing wheel I got from Craggy Aero that has a solid tire.

Tom