A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Owning
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Bonanza Engine Temperatures



 
 
Thread Tools Display Modes
  #1  
Old July 11th 04, 05:16 PM
Peter Shurman
external usenet poster
 
Posts: n/a
Default Bonanza Engine Temperatures

I have a Bonanza F33A...turbonormalized IO-520BB. Can anyone tell me what
are typical operating EGTs and CHTs in climb; at 65% cruise power; at 75%
cruise power? What maximums should be observed in the climb for EGTs, CHTs,
TIT, Oil? I constantly hear conflicting data and would be interested in the
experience of others. I am seeking info for standard 'by-the-book' ROP
operation and for LOP operation with GAMIs -- if you supply LOP info, at
what fuel flow? I you have experience with this engine but not in a Bonanza,
I am still interested in your info. Thanks to all.

Peter Shurman C/GRDT
Toronto, Ontario CANADA


  #2  
Old July 11th 04, 05:59 PM
Stu Gotts
external usenet poster
 
Posts: n/a
Default

Contact George Braly at GAMI (www.gami.com) for a good bunch of
answers on this. They've done much research, especially with the
turbonormalized engines. Much better info from him than on any
newsgroup.


On Sun, 11 Jul 2004 16:16:47 GMT, "Peter Shurman"
wrote:

I have a Bonanza F33A...turbonormalized IO-520BB. Can anyone tell me what
are typical operating EGTs and CHTs in climb; at 65% cruise power; at 75%
cruise power? What maximums should be observed in the climb for EGTs, CHTs,
TIT, Oil? I constantly hear conflicting data and would be interested in the
experience of others. I am seeking info for standard 'by-the-book' ROP
operation and for LOP operation with GAMIs -- if you supply LOP info, at
what fuel flow? I you have experience with this engine but not in a Bonanza,
I am still interested in your info. Thanks to all.

Peter Shurman C/GRDT
Toronto, Ontario CANADA


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Proposals for air breathing hypersonic craft. I Robert Clark Military Aviation 2 May 26th 04 06:42 PM
My Engine Fire!! [email protected] Owning 1 March 31st 04 01:41 PM
Engine... Overhaul? / Replace? advice please text news Owning 11 February 17th 04 04:44 PM
Car engine FAA certified for airplane use Cy Galley Home Built 10 February 6th 04 03:03 PM
Corky's engine choice Corky Scott Home Built 39 August 8th 03 04:29 AM


All times are GMT +1. The time now is 06:16 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.