Oudie IGC

How does Oudie IGC derive TAS and Wind? Especially when there is no thermalling. It does not have Ptot/Pstat input and does not have heading info.
The TAS (5 bytes) and GSP (5 bytes) are recorded in the *.igc file --in the B-Record, as configured by the I-Record.

Also--quantities TRT and VAT are recorded. What is that?


Thanks

At 21:53 17 December 2016, Hartley Falbaum wrote:
How does Oudie IGC derive TAS and Wind? Especially when there is no
thermalling. It does not have Ptot/Pstat input and does not have heading
info.
The TAS (5 bytes) and GSP (5 bytes) are recorded in the *.igc file --in
the
B-Record, as configured by the I-Record.

Also--quantities TRT and VAT are recorded. What is that?


Thanks

TRT -Track True. Three numbers based on degrees clockwise from 000 for
north

VAT -Compensated variometer (total energy/NETTO) vertical speed in metres
per second and tenths of metres per second with leading zero and no dot
(".") separator between metres and tenths. Valid characters 0-9 and
negative sign "-". Negative values to have negative sign instead of leading
zero

On Saturday, December 17, 2016 at 4:53:59 PM UTC-5, Hartley Falbaum wrote:
How does Oudie IGC derive TAS and Wind? Especially when there is no thermalling. It does not have Ptot/Pstat input and does not have heading info.
The TAS (5 bytes) and GSP (5 bytes) are recorded in the *.igc file --in the B-Record, as configured by the I-Record.

Also--quantities TRT and VAT are recorded. What is that?


Thanks

Thanks---
Found this Oudie was connected to an S80. So--mystery solved.