|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
#1
January 12th 07, 09:37 PM
posted to rec.aviation.homebuilt
|
|||
|
|||
Asking to see the STC???
For a covering system (in this case SuperFlite's System 1), there
should be no problem asking SuperFlite to see their STC, right? - Mike 
|
|
#2
January 12th 07, 09:54 PM
posted to rec.aviation.homebuilt
|
|||
|
|||
|
Asking to see the STC???
Michael Horowitz wrote:
For a covering system (in this case SuperFlite's System 1), there should be no problem asking SuperFlite to see their STC, right? - Mike You can see it yourself on the FAA website. http://tinyurl.com/y5ldpj -- J Kimmel www.metalinnovations.com "Cuius testiculos habes, habeas cardia et cerebellum." - When you have their full attention in your grip, their hearts and minds will follow.
|
|
#3
January 12th 07, 09:57 PM
posted to rec.aviation.homebuilt
|
|||
|
|||
|
Asking to see the STC???
On Fri, 12 Jan 2007 13:54:33 -0800, JKimmel
wrote: Michael Horowitz wrote: For a covering system (in this case SuperFlite's System 1), there should be no problem asking SuperFlite to see their STC, right? - Mike You can see it yourself on the FAA website. http://tinyurl.com/y5ldpj Thanks - Mike
|
|
#4
January 12th 07, 10:08 PM
posted to rec.aviation.homebuilt
|
|||
|
|||
|
Asking to see the STC???
On Fri, 12 Jan 2007 16:37:01 -0500, Michael Horowitz
wrote: For a covering system (in this case SuperFlite's System 1), there should be no problem asking SuperFlite to see their STC, right? - Mike Perhaps I asked the wrong question. I thought the STC would outline the steps in the installation procedure to include what metal primers could/not be used. Did I ask for the wrong thing? - MIke
|
|
#5
January 12th 07, 10:28 PM
posted to rec.aviation.homebuilt
|
|||
|
|||
|
Asking to see the STC???
Michael Horowitz wrote: On Fri, 12 Jan 2007 16:37:01 -0500, Michael Horowitz wrote: Perhaps I asked the wrong question. I thought the STC would outline the steps in the installation procedure to include what metal primers could/not be used. Did I ask for the wrong thing? - MIke Go to their web site and download the covering manual. Should be everything you need. Craig C.
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
