If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Refinishing Ventus b Fuselage
On Friday, November 2, 2018 at 3:25:43 PM UTC-7, Richard Pfiffner wrote:
On Friday, November 2, 2018 at 7:59:12 AM UTC-7, Dan Marotta wrote: It appears that your fuselage stand does not have any sort of rollers or bearings to make spinning the fuselage easy.Â* How do you do it?Â* Do you have an assistant lift the nose while you rotate at the ring? Curious... On 11/1/2018 6:48 PM, Richard Pfiffner wrote: On Saturday, October 27, 2018 at 4:35:37 PM UTC-7, Richard Pfiffner wrote: On Friday, October 26, 2018 at 8:36:12 AM UTC-7, Charlie M. (UH & 002 owner/pilot) wrote: "Bam....be.......". Yes, I have hit a deer at about 50MPH, amazing the damage that can be done. :-( Last 2 coats of Vinyl ester primer sand with 180g next. The reason for so many coats of fairing primer and primer is to sand to make sure the surface is flat with no flaws. If you don't do this the finish with not be good and all the defects will show at the finish coat. Next sanding with P180. http://www.craggyaero.com/ventus.htm Richard Richard www.craggyaero.com Last coat of JP202 Primer, tomorrow sand with P320, then top coat with JAU Acrylic Urethane. http://www.craggyaero.com/ventus.htm Richard www.craggyaero.com -- Dan, 5J Two wheels in the bottom stand ring rolls on them. It is white again 3 coats JAU Acrylic Urethane. http://www.craggyaero.com/ventus.htm Richard www.craggyaero.com |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
refinishing Ventus 2cm- wing profile | [email protected] | Soaring | 20 | November 6th 11 12:15 AM |
refinishing | Stig Pedersen | Soaring | 1 | November 27th 05 04:50 PM |
refinishing | Stig Pedersen | Soaring | 1 | November 26th 05 09:16 PM |
Second speaker in Ventus 2b/c fuselage | [email protected] | Soaring | 3 | September 14th 05 05:41 PM |
REFINISHING | Ventus B | Soaring | 32 | December 3rd 03 10:14 PM |