A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Rotorcraft
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Mini-500 helicopter Mast Support Program.



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old August 2nd 08, 07:48 PM posted to rec.aviation.rotorcraft
Dennis Fetters
external usenet poster
 
Posts: 108
Default Mini-500 helicopter Mast Support Program.

This is a news announcement for Mini-500 owners.

It is not meant to be a tread for personal comments or attacks. It is to
help people.

As you may know, Revolution Helicopter manufactured the Mini-500 from
1990 to 2000, and then closed their doors forever, putting to rest the
best kit built helicopter there has ever been to date.

The Mini-500, as all new designs, had a few technical problems along the
way. Before closing the factory, Revolution Helicopter sold at their
cost an upgrade package called the Mast Support Kit, which included
fixes for all the problems the Mini-500 had ever experienced. But, only
about 100 or so of these Mast Support upgrades were purchased by the 500
Mini-500 owners, because most of them were experiencing no problems and
didn't think they needed it.

After Revolution Helicopter closed their doors, all the Mini-500 owners
later found out that the factory was correct, and they all ended up
needing the upgrades, but then it was too late. The result is that any
Mini-500 that does not have the Mast Support upgrade is now worthless as
a safe flying helicopter, at any price. Any Mini-500 helicopter that
does not have the factory mandated Mast Support upgrade and the other
upgrades that came with the kit will forever have problems with frame
cracks and flight vibration, which could lead to a crash. But, the lucky
Mini-500 owners that did upgraded with the Mast Support kit, are flying
well and their aircraft are still retaining their value.

The designer of, and owner of all rights to the Mini-500, Mr. Dennis
Fetters, has moved on to other interests, but has decided to help the
Mini-500 one last time do to the large amount of requests he is
receiving to provide this vital upgrade. He is compiling a list of
people that would be interested in a Mast Support upgrade, and if enough
are, he would manufacture only that amount of units, with no extras.
It's a one last time, last chance deal.

Although Mr. Fetters has recommended that no helicopter should be flown
without factory support, he realizes that it is unrealistic to expect
people to follow that advice, and this upgrade was the most important
one that corrects all known problems.

This is good news for the Mini-500, and will revive many back into
operation and increase their value. For anyone interested, please
contact Mr. Fetters and get on the list. His email address is:




This is what the letter from Mr. Feters said;


Subject: Mini-500 Mast Support Upgrades

Consistence: 1 page

Sent on: June 25, 2008

Dear Mini-500 enthusiasts,

Although I no longer do business concerning the Mini-500, I have had
people contacting me wanting to know where they can buy the mandatory
Mast Support upgrade for their Mini-500 helicopters. I have also had
many people say that they would consider buying a used Mini-500 if they
could upgrade it.

Any Mini-500 helicopter that does not have these vital upgrades is
virtually a worthless aircraft. Even though it fly’s well enough new, in
time you will have permanent and uncorrectable trouble that could lead
to an accident. The Mast Support and included upgrade kit took care of
all the growing pains of the Mini-500 and turned it into a trouble free
and well flying helicopter.

If there were enough people to come together that would be willing to
purchase this vital package, then I would consider building a limited
number of Mast Support upgrades, along with the other mandatory upgrades
that came in that same package. To do this, I would need anyone
interested to contact me to be added to the list. The price can only be
determined once I know how many I need to make. The more I make the less
they will cost.

This is a one time deal. Those that did not purchase the package back
when RHCI was in business surly regretted not doing so later. If you do
not get it now, you will never get one, so please let me know this time.
I will not build them again after this, and I will not build extra. I
can be contacted at the email address above. Once I have the names of
everyone that needs one, then I will let them know the price, which will
be affordable.

Most sincerely,

Dennis Fetters
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
MINI 500, Rinke, Turbine, Helicopter for sale, Helicopter, Revolution, Turbine Power TurbineMini Richard Rotorcraft 2 January 28th 09 07:50 PM
Mini-500 helicopter Mast Support Program. Dennis Fetters Home Built 4 August 4th 08 06:17 AM
Mini Helicopter Thinks for Itself NewsBOT Simulators 0 February 18th 05 09:46 PM
Screwed by Helicopter Support Inc. Becky DeWind Owning 3 May 18th 04 01:14 PM
Army ends 20-year helicopter program Garrison Hilliard Military Aviation 12 February 27th 04 07:48 PM


All times are GMT +1. The time now is 07:42 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.