Volkslogger Date Issue Information and Repair

Please visit this link to get information about the Volkslogger Date issue.

http://support.air-avionics.com/hc/d...cles/203725968

Air-Avionics is set up to deal with the issue.

Thanks,

Richard
www.craggyaero.com

Is there an authorized service center in the US, or does the VL have to be sent back to Germany?

2KA wrote:
Is there an authorized service center in the US, or does the VL have to
be sent back to Germany?

If there is no us rep to do this I think a group order would be good to
save on shipping.

I would be in.

Peter

Too much stuff to do and it requires a windows 98 computer.

So it has to be sent back to Germany.

Richard
www.craggyaero.com

Maybe the best solution is to replace with a LXNAV NANO $436

http://www.craggyaero.com/lxnav_flight_recorders.htm

Richard
www.craggyaero.com

On Wednesday, January 21, 2015 at 4:12:06 PM UTC-8, Richard wrote:
Maybe the best solution is to replace with a LXNAV NANO $436

http://www.craggyaero.com/lxnav_flight_recorders.htm

Richard
www.craggyaero.com
Hey Richard, what can you make with 2 of those and a piece of string ? just saying

On Wednesday, January 21, 2015 at 4:26:37 PM UTC-8, Dennis Vreeken wrote:
On Wednesday, January 21, 2015 at 4:12:06 PM UTC-8, Richard wrote:
Maybe the best solution is to replace with a LXNAV NANO $436

http://www.craggyaero.com/lxnav_flight_recorders.htm

Richard
www.craggyaero.com
Hey Richard, what can you make with 2 of those and a piece of string ? just saying



One piece of string and 2 Nanos.



Richard

On Wednesday, January 21, 2015 at 6:09:46 PM UTC-6, Richard wrote:
Too much stuff to do and it requires a windows 98 computer.

So it has to be sent back to Germany.

Richard
www.craggyaero.com

Germany isn't the only place that has Windows 98 computers, Richard. What else would I need? :-)

Steve Leonard

On Wednesday, January 21, 2015 at 7:37:28 AM UTC-8, Richard wrote:
Please visit this link to get information about the Volkslogger Date issue.

http://support.air-avionics.com/hc/d...cles/203725968

Air-Avionics is set up to deal with the issue.

Thanks,

Richard
www.craggyaero.com
I meant the V.L's not the nanos of course !

On Thursday, January 22, 2015 at 6:51:09 AM UTC-8, Steve Leonard wrote:
On Wednesday, January 21, 2015 at 6:09:46 PM UTC-6, Richard wrote:
Too much stuff to do and it requires a windows 98 computer.

So it has to be sent back to Germany.

Richard
www.craggyaero.com

Germany isn't the only place that has Windows 98 computers, Richard. What else would I need? :-)

Steve Leonard

Steve,

The whole process requires taking the GPS module apart and replacing a small battery, then initializing the GPS with a terminal program windows 98 the replacing the main battery in the Volkslogger and resetting the security seal with a newer computer.

The seal reset has to be done by a SSA approved Calibration Lab.

And after this you would still have an old Volkslogger, they were good in their day but lots better solutions available now.

I decided that it was not in my best interest to put labor into an old Volkslogger. My experience especially with the round connector ones has not been good too much corrosion etc.

Thanks,

Richard,