A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Home Built
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

360 Comm



 
 
Thread Tools Display Modes
  #1  
Old August 3rd 06, 05:38 PM posted to rec.aviation.homebuilt
Tri-Pacer[_1_]
external usenet poster
 
Posts: 26
Default 360 Comm

Does anyone have an old 360 Comm they'd let go cheap?

I'd like to get a transistorized one that I could run with a 12VDC wall
wart.

My hangar is in a row perpendicular to the runway. I'm about in the center.
That means I stop what I'm doing about every 10 minutes and go to the end of
the row to see what that interesting sounding airplane
is.

I want to put a receiver in a box with a speaker and know if the plane
landing or taking off is my buddy or something interesting.
The transmit portion can be dead.

Thanks

Paul
N1431A

paul-anton at comcast dot net


  #2  
Old August 4th 06, 01:53 AM posted to rec.aviation.homebuilt
pro
external usenet poster
 
Posts: 2
Default 360 Comm

You would be better off with an scanner that tunes aircraft. Then you
could scan the tower and ground, and atc. I tried what you are doing,
but had to run back and forth to change freqs every few minutes...found
an old scanner at a yard sale for 5 bucks and set it up in the hanger...

Tri-Pacer wrote:


Does anyone have an old 360 Comm they'd let go cheap?

I'd like to get a transistorized one that I could run with a 12VDC wall
wart.

My hangar is in a row perpendicular to the runway. I'm about in the center.
That means I stop what I'm doing about every 10 minutes and go to the end of
the row to see what that interesting sounding airplane
is.

I want to put a receiver in a box with a speaker and know if the plane
landing or taking off is my buddy or something interesting.
The transmit portion can be dead.

Thanks

Paul
N1431A

paul-anton at comcast dot net


  #3  
Old August 4th 06, 09:41 PM posted to rec.aviation.homebuilt
[email protected]
external usenet poster
 
Posts: 32
Default 360 Comm

I have a CoMM 11 Narco I'd part with for $35.

I'd guess it would need an speaker like a powered
computer one since it puts out 1v type audio.

Bill Hale Loveland CO


Tri-Pacer wrote:
Does anyone have an old 360 Comm they'd let go cheap?

I'd like to get a transistorized one that I could run with a 12VDC wall
wart.

My hangar is in a row perpendicular to the runway. I'm about in the center.
That means I stop what I'm doing about every 10 minutes and go to the end of
the row to see what that interesting sounding airplane
is.

I want to put a receiver in a box with a speaker and know if the plane
landing or taking off is my buddy or something interesting.
The transmit portion can be dead.

Thanks

Paul
N1431A

paul-anton at comcast dot net


  #4  
Old August 5th 06, 04:09 PM posted to rec.aviation.homebuilt
Tri-Pacer[_1_]
external usenet poster
 
Posts: 26
Default 360 Comm

Shoot me an address and I'll send a check.

I'm glad you mentioned the amplified speaker idea.

Thanks much

Paul Anton



" wrote in message
oups.com...
I have a CoMM 11 Narco I'd part with for $35.

I'd guess it would need an speaker like a powered
computer one since it puts out 1v type audio.

Bill Hale Loveland CO


Tri-Pacer wrote:
Does anyone have an old 360 Comm they'd let go cheap?

I'd like to get a transistorized one that I could run with a 12VDC wall
wart.

My hangar is in a row perpendicular to the runway. I'm about in the
center.
That means I stop what I'm doing about every 10 minutes and go to the end
of
the row to see what that interesting sounding airplane
is.

I want to put a receiver in a box with a speaker and know if the plane
landing or taking off is my buddy or something interesting.
The transmit portion can be dead.

Thanks

Paul
N1431A

paul-anton at comcast dot net




 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
King Comm Tom Cummings Owning 2 September 13th 04 07:01 PM
Retractable Comm Antenna Ron Wanttaja Home Built 11 September 6th 04 06:59 PM
Buying a used COMM res Owning 8 January 24th 04 05:46 AM
Lost comm altitude? Roy Smith Instrument Flight Rules 12 January 11th 04 01:29 AM
WinPilot ADV comm port setting Ted Wagner Soaring 1 December 29th 03 06:44 PM


All times are GMT +1. The time now is 11:15 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright Đ2004-2024 AviationBanter.
The comments are property of their posters.