A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Soaring
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

CAD drawing for DG instrument panel...



 
 
Thread Tools Display Modes
  #1  
Old April 6th 06, 06:14 PM posted to rec.aviation.soaring
external usenet poster
 
Posts: n/a
Default CAD drawing for DG instrument panel...

Before I draw up my own, I'm wondering if anyone out there has a CAD
drawing for a DG instrument panel (non-motorglider, 300, 600, 800S, and
possibly 100/200 panels should all be usable). I want to use an NC
machine to cut a new panel face for my DG-600. If anyone has a drawing
for any panel with correct standard instrument holes (altimeter, in
particular), that would also be helpful...

Thanks,
Marc

Note: remove REMOVE from email address...
  #2  
Old April 6th 06, 08:34 PM posted to rec.aviation.soaring
external usenet poster
 
Posts: n/a
Default CAD drawing for DG instrument panel...

Try this one, Marc:
http://www.dg-flugzeugbau.de/Data/instrument-panel.zip

  #3  
Old April 6th 06, 11:05 PM posted to rec.aviation.soaring
external usenet poster
 
Posts: n/a
Default CAD drawing for DG instrument panel...

That was easy...........any tips on where to dind a CAD drawinf of a
panel for Ventus C (lift up) ?
Cheers
Mark

  #4  
Old April 6th 06, 11:14 PM posted to rec.aviation.soaring
external usenet poster
 
Posts: n/a
Default CAD drawing for DG instrument panel...

Here is a link to M&H and V2C panel.

http://www.mandhsoaring.com/Panels/Panel_2b.pdf

Bob




  #5  
Old April 6th 06, 11:19 PM posted to rec.aviation.soaring
external usenet poster
 
Posts: n/a
Default CAD drawing for DG instrument panel...

JS wrote:
Try this one, Marc:
http://www.dg-flugzeugbau.de/Data/instrument-panel.zip


Thanks, I did have that, but I was hoping someone had something that
they had verified was dimensionally accurate...

Marc
  #6  
Old April 7th 06, 07:12 AM posted to rec.aviation.soaring
external usenet poster
 
Posts: n/a
Default CAD drawing for DG instrument panel...

Marc Ramsey wrote:
Before I draw up my own, I'm wondering if anyone out there has a CAD
drawing for a DG instrument panel (non-motorglider, 300, 600, 800S, and
possibly 100/200 panels should all be usable). I want to use an NC
machine to cut a new panel face for my DG-600. If anyone has a drawing
for any panel with correct standard instrument holes (altimeter, in
particular), that would also be helpful...

Thanks,
Marc


Marc,
I've got a DG-600 non motor and a buddy of mine & I (more him than me)
cut a panel on his CNC mill last season. We used I think .090
aluminum . We used the old fiberglass panel for a templett, cut the
outline, used a hand brake to bend the lower mounting flange, the upper
and side flanges to secure the pod cover. If there is enough interest
he's willing to cut more of these panels and can cut to your specs. I
had him cut 3 large holes, 80mm in the top row and 2 rows of 57mm
below plus 4 circuit breaker holes and 1 master switch hole .
you can contact me at r.barry at sbcglobal dot net.

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
terminology questions: turtledeck? cantilever wing? Ric Home Built 2 September 13th 05 09:39 PM
Instrument Checkride passed (Long) Paul Folbrecht Instrument Flight Rules 10 February 11th 05 03:41 AM
Instrument panel labelling options John Galban Home Built 12 November 18th 04 11:42 PM
Logging approaches Ron Garrison Instrument Flight Rules 109 March 2nd 04 06:54 PM
PC flight simulators Bjørnar Bolsøy Military Aviation 178 December 14th 03 01:14 PM


All times are GMT +1. The time now is 03:38 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.