If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
bulding a kitplane maybe Van's RV9A --- a good idea ?????
Chris,
I have helped build fiberglass, tube and fabric, wood and fiberglass, and all aluminum kits and "plans built" aircraft. Regardless of the construction method there is one thing that stands out about the process of "home-building" and that is Commitment. Commitment, of course, means emotional and mental dedication. However, it also means a financial and time investment. When it comes to designs that are "cross-country cruisers" there is a financial advantage in building your own aircraft if you consider the performance to expense ratio between the cost of the home-built and the cost of a relatively new "factory" aircraft. If you are going to use the aircraft for just hopping around a local area in search of the perfect $100 breakfast or lunch, then there are times when an investment in an older factory produced aircraft might cost less than the investment in one of the higher performance kits. The RV-9/9A with the least expensive engine still out-performs a C-150/152, but may cost more to build than the purchase of an older model 2-seater. I have assisted with the construction of three of Van's designs. The first was an RV-3 and that was before he was using CNC processes and most folks were still building their own spars. At that time I could have given you a list of "gripes." However, the RV-6A and the RV-8 kits I have been/am involved with are amazing for the quality of the kit and the documentation. Both of the latter aircraft were ordered as "fast-build" (a relative term) kits and the things came out of the crates looking like airplanes already and the cost differential between the basic kit and fast-build was minimal. How minimal becomes more apparent as you start logging your actual building hours. Hours. If you are single, living alone, and don't need to hold down an actual job, building the aircraft is strictly YOUR project. If you have any vocational commitments or family commitments, then the project is actually a group affair. Even if other members of your family don't get involved in the actual construction process, their support (and an understanding of our particular obsession) is necessary if the process is going to be a "happy" experience. Maybe you are naturally a very "balanced" person, however most of the folks I know really immersed themselves in the project for the first few months after receiving their kits. The folks who actually were able to "keep a happy home", make steady progress without big gaps in activity, and finish their kits in a reasonable time eventually figured out that it was a good idea to "do a little bit each and every day" rather than try to maintain a frantic pace at the expense of the rest of their lives. Life can throw curves at you that can slow or stop progress on your aircraft. In the worse case, you may have to sell what you have. In this case, having one of the Van's design kits means that it is much easier to sell (without a big financial loss) your project. Even if you order a "fast build" kit there is still a ton of physical work to do and a lot of time -and money- will be spent on obtaining all of the "system" components. The engine and instrument panel/electronics can be ordered so complete that they are almost "drop ins" . However, buying that level of completeness can really put a serious pinch on your purse. If you have the budget to do that - great - but many folks need to space out the purchase of all of that stuff and that means planning and searching time. It has been my personal experience that spending the money to buy everything (including the "optional" stuff) on Van's tool list is a very good idea. Building an aircraft can be so time consuming that you tend to trade current PIC time for building time. Even though the RV-9/9A is designed to make the transition from a light GA aircraft into something with a little (lots more with a Lyc 360) performance improvement an easy process - make the time to stay current. Along the entire process, you will need to keep the people at the Luftfahrt-Bundesamt happy. I know that this didn't give you the "negatives" about the Van's designs you asked for, but your final statement of "P.S. Maybe I only hope that somebody prevent me from doing a homebuilt." indicated you were still uncommitted and might benefit from some additional "gray hair" information. If you go into a project like this with your eyes open and a strong commitment, then flying an aircraft you have built with your own hands is an incredibly satisfying experience. Best of luck, J "Christoph Brehm" wrote in message ... Hello all ! Since some month I studied literature and looking at websides (EAA, FAA, Buildersides) about homebuilding a plane, a lot of information out there an something hardly to understand if you are the first time in this stuff. But at the end of that process I decided that building a plane could be the right way to get a new plane with good performance low maintenance cost and so on. The next step was to decide which kit is the best for me, I think there are more then 750 different kits on the market and it is not easy to find the right one. After reading some good information about decsion-making I started from the beginning and than I decided a kitplane from Van's aircraft could be the right one for me. Therefore in the last day's I spent a lot of time reading all information about Van's aicraft I could get mostly from the internet and from buildersides ( I also checked the NTSB for Information) because here in europe you are not able to get magzines about kitplanes with maybe some more objektive information. There are a lot of very good RV buildersides with many pictures and text about costs time and tipps. But after a while I wondered a bit because there is nearly nothing bad to read about Van's aicraft kitplanes on these sides. Everything is matching good, not really a problem with the construction planes or manuals, seems always easy to build, fly always with excelent performance and so on. All those sides are sponsored by Van's ?? I can't belive that ?!!? No information out there about people wo kicked the whole crap in a corner, because nothing fit's at all, all parts are skew, not enough information in the manual, to difficult to build for a non aircraft mechanic ?!?!? Don't missunderstand me ! from the information I have I like these aircrafts from Van's and the way you have to build them, the material and so on. But there must be something bad about them out there ????? Is there anybody who could give me some objektive information maybe about the RV9A or the Van's Kitplanes at all ????? I would be very thankful about those information kind regards and thanks a lot in advance Chris P.S. Maybe I only hope that somebody prevent me from doing a homebuilt ;-) |
Thread Tools | |
Display Modes | |
|
|