PowerFlarm Update?

The hex code is part of a Mode S
transponder configuration. Mode A/C
transponders don't have a code.

The Trig Avionics website has the
Installation Manuals where you can read
up on Mode S transponder configuration.

At 13:46 21 March 2015, Richard wrote:
On Saturday, March 21, 2015 at 6:23:23
AM UTC-7, JJ Sinclair wrote:
OK, I updated my FLARM to 6.0 and
told it my new HEX number (different
sa=
ilplane), but as far as I can see my my
mode a/c transponder doesn't know
m=
y HEX number...............am I missing
something here? How does the FLARM
=
know to disregard my transponder
squalk?
JJ


JJ,

you also need a sentence in the config
file to set the kind of xponder.

# Set what kind of transponder you have
installed:
# 0 ... no XPDR (default)
# 1 ... Mode C
# 2 ... Mode S

# configure transponder type
$PFLAC,S,XPDR,2


Richard
www.craggyaero.com

On Saturday, March 21, 2015 at 6:23:23 AM UTC-7, JJ Sinclair wrote:
OK, I updated my FLARM to 6.0 and told it my new HEX number (different sailplane), but as far as I can see my my mode a/c transponder doesn't know my HEX number...............am I missing something here? How does the FLARM know to disregard my transponder squalk?
JJ

JJ

You also need to configure the transponder with the HEX code as George said..

It is in the Garrecht Manual.

Richard
www.craggyaero.com