A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Owning
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Cowl Mount Modification for Cessna 175A



 
 
Thread Tools Display Modes
  #1  
Old November 22nd 08, 03:48 PM posted to rec.aviation.owning
Clay[_2_]
external usenet poster
 
Posts: 16
Default Cowl Mount Modification for Cessna 175A

Is it possible and practical to eliminate the standard cowl mount
brackets and attach the cowl to the fuselage with Cam Lock fasteners?
I would like to consider the CAM LOCK 4000 series (stainless with
phillips head)
Is there an STC for this modification for a C-175A?
  #2  
Old November 22nd 08, 05:46 PM posted to rec.aviation.owning
[email protected]
external usenet poster
 
Posts: 1,130
Default Cowl Mount Modification for Cessna 175A

On Nov 22, 8:48*am, Clay wrote:
Is it possible and practical to eliminate the standard cowl mount
brackets and attach the cowl to the fuselage with Cam Lock fasteners?
I would like to consider the CAM LOCK 4000 series (stainless with
phillips head)
Is there an STC for this modification for a C-175A?


Skybolt Fasteners http://www.skybolt.com/ has kits for many
but I can't see the 175 there. Might be worth calling them. Does your
airplane have the Southco quarter-turn fasteners now? If so, stick
with them. The Skybolts aren't much better.
Dan
  #3  
Old November 23rd 08, 12:29 AM posted to rec.aviation.owning
Clay[_2_]
external usenet poster
 
Posts: 16
Default Cowl Mount Modification for Cessna 175A

On Nov 22, 11:46*am, wrote:
On Nov 22, 8:48*am, Clay wrote:

Is it possible and practical to eliminate the standard cowl mount
brackets and attach the cowl to the fuselage with Cam Lock fasteners?
I would like to consider the CAM LOCK 4000 series (stainless with
phillips head)
Is there an STC for this modification for a C-175A?


* * * *Skybolt Fasteners *http://www.skybolt.com/*has kits for many
but I can't see the 175 there. Might be worth calling them. Does your
airplane have the Southco quarter-turn fasteners now? If so, stick
with them. The Skybolts aren't much better.
* * * * * * * Dan


The cowling on a C-175 attaches to four brackets which are bolted to
the engine mounts.
My goal is to eliminate the brackets and attach to the fuselage,
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Good Garmin 396 Mount - Cessna.. Dan[_1_] Piloting 12 August 9th 07 04:33 AM
Good Garmin 396 Mount - Cessna.. Dan[_1_] Products 12 August 9th 07 04:33 AM
Winter Flying - Cessna 185 Ski Plane, Mount McKinley, Alaska.jpg (1/1) Mitchell Holman[_2_] Aviation Photos 0 January 30th 07 01:18 PM
Cessna 182/A Cowl Lip RST Engineering Owning 1 July 8th 05 05:42 PM
Need a Cessna 120 engine mount Jerry Aviation Marketplace 0 November 28th 04 02:16 AM


All times are GMT +1. The time now is 06:05 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.