A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Home Built
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

"Lippsing" a Q-tip propeller



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old April 16th 09, 07:38 AM posted to rec.aviation.homebuilt
MP[_2_]
external usenet poster
 
Posts: 5
Default "Lippsing" a Q-tip propeller

Thought I'd ask for comments before doing something stupid and irreparable
to our propeller.

We have a Hartzell Q-tip prop on our Glasair. That's the fancy bent over tip
that gets all the jokes about the FAA Inspector who grounded a Cheyenne when
the propellor first came out. (Looks like the prop had a ground strike.)
When we got it, the Q-tip was a hot thing, and we were coming off a Prince
P-tip, which also had a turned under "winglet."

Then Paul Lipps came along and wrote that putting a big hunk of metal out
there on the prop tip is about the stupidest thing one could do, since the
prop tip is where velocity - and therefore, drag - is highest. He wrote
about cutting the tips off a Prince wood prop and getting a phenomenal
improvement in propeller efficiency.

I'm not going to cut off the Q-tip entirely. But I thought I would try a
compromise solution, and cut part of it off. I should link a photo to show
you my markups on the tip, but the plan is to cut the front of the winglet
to put a 60 degree shear on the front, like you see on the Katana wingtips
and on Paul Lipps' Lancair. I will be careful, will sand out the stress
risers, etc. I have a good gram scale to weigh the cutoffs to match, and a
dynamic prop balancer to rebalance after the operation.

It's a homebuilt, so I'm deep into "experimental" mode on this one. Anyone
want to warn me about how I might kill myself doing this? Has anyone done
this before?

Thanks,

Mike Palmer


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Phrase "landing runway" vs. "cleared to land" Robert M. Gary Piloting 168 February 5th 08 06:32 PM
Phrase "landing runway" vs. "cleared to land" Robert M. Gary Instrument Flight Rules 137 February 5th 08 06:32 PM
Old polish aircraft TS-8 "Bies" ("Bogy") - for sale >pk Aviation Marketplace 0 October 16th 06 07:48 AM


All times are GMT +1. The time now is 04:12 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.