A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Home Built
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Need connector for King KI-206



 
 
Thread Tools Display Modes
  #1  
Old January 13th 04, 09:17 PM
DanD
external usenet poster
 
Posts: n/a
Default Need connector for King KI-206

If anyone has a spare connector for a KI-206 I would appreciate
hearing from you.
Thanks,
Dan

  #2  
Old January 13th 04, 09:52 PM
Jim Weir
external usenet poster
 
Posts: n/a
Default

Believe me, you don't want to price a new one. I got connectors for all my King
stuff at Kenny Faeth's boneyard down in Sacramento. I know he does mail order
if you want to do business that way. Expect to spend $15-20 plus postage.

Repost if you want me to look up the phone number.

Jim


DanD
shared these priceless pearls of wisdom:

-If anyone has a spare connector for a KI-206 I would appreciate
-hearing from you.
-Thanks,
-Dan

Jim Weir (A&P/IA, CFI, & other good alphabet soup)
VP Eng RST Pres. Cyberchapter EAA Tech. Counselor
http://www.rst-engr.com
  #3  
Old January 14th 04, 12:50 AM
external usenet poster
 
Posts: n/a
Default

I couldn't find a connector for my KI-203 (basically the same as for the 206). I had
to get it through an avionics shy.... just shy of the $100 mark, and that was without a pin
removal tool. You can be sure I double-double-checked it before I put the pins in! They're
usually gold-plated so a boneyard one should be sufficient, as long as it's got good wires on
it.

-Cory

Jim Weir wrote:
: Believe me, you don't want to price a new one. I got connectors for all my King
: stuff at Kenny Faeth's boneyard down in Sacramento. I know he does mail order
: if you want to do business that way. Expect to spend $15-20 plus postage.

: Repost if you want me to look up the phone number.

: Jim


: DanD
: shared these priceless pearls of wisdom:

: -If anyone has a spare connector for a KI-206 I would appreciate
: -hearing from you.
: -Thanks,
: -Dan

: Jim Weir (A&P/IA, CFI, & other good alphabet soup)
: VP Eng RST Pres. Cyberchapter EAA Tech. Counselor
: http://www.rst-engr.com

--
************************************************** ***********************
* The prime directive of Linux: *
* - learn what you don't know, *
* - teach what you do. *
* (Just my 20 USm$) *
************************************************** ***********************

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 10:00 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.