A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » General Aviation
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Best tug for a 3000lb SEP?



 
 
Thread Tools Display Modes
  #1  
Old April 22nd 05, 08:35 PM
Newps
external usenet poster
 
Posts: n/a
Default Best tug for a 3000lb SEP?

Look for a used golf cart, it will have many other uses other than just
a tug.



Peter wrote:

Hi,

A colleague is looking for a tug, perhaps an electric one, capable of
towing the aircraft (a TB20) by the first wheel a distance of about 50
yards.

I say "electric" because petrol engined tugs seems to be a bit
temperamental, and this is in a very tight hangar and a lot of control
over the forward/reverse speed is needed.

I can do a web search but would appreciate any suggestions on a good
quality product with very smooth speed control.



Peter.
--
Return address is invalid to help stop junk mail.
E-mail replies to but remove the X and the Y.
Please do NOT copy usenet posts to email - it is NOT necessary.

  #2  
Old April 22nd 05, 08:42 PM
Jim Burns
external usenet poster
 
Posts: n/a
Default

Hydrostatic garden tractor.
Jim

"Peter" wrote in message
...
Hi,

A colleague is looking for a tug, perhaps an electric one, capable of
towing the aircraft (a TB20) by the first wheel a distance of about 50
yards.

I say "electric" because petrol engined tugs seems to be a bit
temperamental, and this is in a very tight hangar and a lot of control
over the forward/reverse speed is needed.

I can do a web search but would appreciate any suggestions on a good
quality product with very smooth speed control.



Peter.
--
Return address is invalid to help stop junk mail.
E-mail replies to but remove the X and the Y.
Please do NOT copy usenet posts to email - it is NOT necessary.



  #3  
Old April 23rd 05, 07:09 PM
John Kunkel
external usenet poster
 
Posts: n/a
Default


"Jim Burns" wrote in message
...
Hydrostatic garden tractor.
Jim


I'll second that, a couple of locals use them and they work great, are
readily available and cheap.





"Peter" wrote in message
...
Hi,

A colleague is looking for a tug, perhaps an electric one, capable of
towing the aircraft (a TB20) by the first wheel a distance of about 50
yards.

I say "electric" because petrol engined tugs seems to be a bit
temperamental, and this is in a very tight hangar and a lot of control
over the forward/reverse speed is needed.

I can do a web search but would appreciate any suggestions on a good
quality product with very smooth speed control.



  #4  
Old April 23rd 05, 11:48 PM
Brian Whatcott
external usenet poster
 
Posts: n/a
Default

On Sat, 23 Apr 2005 11:09:54 -0700, "John Kunkel"
wrote:


"Jim Burns" wrote in message
...
Hydrostatic garden tractor.
Jim


I'll second that, a couple of locals use them and they work great, are
readily available and cheap.



Cheap?
Not exactly!

:-)

Brian W
  #5  
Old April 24th 05, 12:03 AM
Matt Barrow
external usenet poster
 
Posts: n/a
Default


"Brian Whatcott" wrote in message
...
On Sat, 23 Apr 2005 11:09:54 -0700, "John Kunkel"
wrote:


"Jim Burns" wrote in message
...
Hydrostatic garden tractor.
Jim


I'll second that, a couple of locals use them and they work great, are
readily available and cheap.



Cheap?
Not exactly!


About eight of us share an old John Deere 11HP lawn tractor (parked in a
shed adjacent to the T-hangers) and it pulls everything from 182's to small
turboprops.

Nice thing is it already has the hitch and the bumper/frame is beefy enough
to handle the bigger loads.



  #6  
Old April 24th 05, 01:25 PM
Ron Rosenfeld
external usenet poster
 
Posts: n/a
Default

On Sat, 23 Apr 2005 16:03:28 -0700, "Matt Barrow"
wrote:

About eight of us share an old John Deere 11HP lawn tractor (parked in a
shed adjacent to the T-hangers) and it pulls everything from 182's to small
turboprops.

Nice thing is it already has the hitch and the bumper/frame is beefy enough
to handle the bigger loads.


We have one, too. And I have no problem "pulling". But I've never got
that knack of "pushing" with it. So I wound up getting a NoseDragger.


Ron (EPM) (N5843Q, Mooney M20E) (CP, ASEL, ASES, IA)
  #7  
Old April 24th 05, 07:25 PM
John Kunkel
external usenet poster
 
Posts: n/a
Default


"Brian Whatcott" wrote in message
...
On Sat, 23 Apr 2005 11:09:54 -0700, "John Kunkel"
wrote:


"Jim Burns" wrote in message
...
Hydrostatic garden tractor.
Jim


I'll second that, a couple of locals use them and they work great, are
readily available and cheap.



Cheap?
Not exactly!


Think "used", "preowned", etc.


  #8  
Old April 24th 05, 11:08 PM
Matt Barrow
external usenet poster
 
Posts: n/a
Default


"John Kunkel" wrote in message
...

"Brian Whatcott" wrote in message
...
On Sat, 23 Apr 2005 11:09:54 -0700, "John Kunkel"
wrote:


"Jim Burns" wrote in message
...
Hydrostatic garden tractor.
Jim

I'll second that, a couple of locals use them and they work great, are
readily available and cheap.



Cheap?
Not exactly!


Think "used", "preowned", etc.


Ours (John Deere lawn/garden tractor) is about 20 years old. Lube and oil
change in the spring and it's good to go.



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 07:27 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.