A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Home Built
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Fisher Horizon 2 STOL



 
 
Thread Tools Display Modes
  #1  
Old February 26th 05, 12:45 PM
IAN DONALDSON
external usenet poster
 
Posts: n/a
Default Fisher Horizon 2 STOL

G'day from Australia


A friend of mine has purchased a Fisher Horizon 2 STOL that was made in the
USA and imported into Australia.

The manner in which some of the construction has been done is now causing
him some concern. He has been in touch with the people that took over the
factory, but he has not had the courtesy of any replies to his emails.

Unfortunately the plane did not come with any plans and what he would like
to do is make contact with someone that has this model of Fisher so that he
can discuss his concerns with them.

Perhaps if someone has a set of plans that he could beg a loan of, borrow or
buy he would also be very pleased to hear from them.


Thanks and regards


Ian Donaldson


Ads
  #2  
Old February 27th 05, 12:09 AM
Steve Foley
external usenet poster
 
Posts: n/a
Default

Looks like Fisher will sell the plans for $350.

http://www.fisherflying.com/fleet/Horizon2/prices.php

"IAN DONALDSON" wrote in message
...
G'day from Australia


A friend of mine has purchased a Fisher Horizon 2 STOL that was made in

the
USA and imported into Australia.

The manner in which some of the construction has been done is now causing
him some concern. He has been in touch with the people that took over the
factory, but he has not had the courtesy of any replies to his emails.

Unfortunately the plane did not come with any plans and what he would like
to do is make contact with someone that has this model of Fisher so that

he
can discuss his concerns with them.

Perhaps if someone has a set of plans that he could beg a loan of, borrow

or
buy he would also be very pleased to hear from them.


Thanks and regards


Ian Donaldson




  #3  
Old February 27th 05, 07:59 PM
David Wilson
external usenet poster
 
Posts: n/a
Default

Plans for the Horizon 2 STOL are different from those listed at the Fisher
web site. The plans they have for sale are for the all wood, shorter wing
version. I don't think they support the other. I don't know how may kits
were sold for the STOL version but the one Mike Fisher had on display at
Oshkosh had a steel square tube fuselage and more wingspan than the wooden
version.

David Wilson
N203ED
Fisher Horizon 2


"Steve Foley" wrote in message
...
Looks like Fisher will sell the plans for $350.

http://www.fisherflying.com/fleet/Horizon2/prices.php

"IAN DONALDSON" wrote in message
...
G'day from Australia


A friend of mine has purchased a Fisher Horizon 2 STOL that was made in

the
USA and imported into Australia.

The manner in which some of the construction has been done is now

causing
him some concern. He has been in touch with the people that took over

the
factory, but he has not had the courtesy of any replies to his emails.

Unfortunately the plane did not come with any plans and what he would

like
to do is make contact with someone that has this model of Fisher so that

he
can discuss his concerns with them.

Perhaps if someone has a set of plans that he could beg a loan of,

borrow
or
buy he would also be very pleased to hear from them.


Thanks and regards


Ian Donaldson






  #4  
Old February 28th 05, 12:23 PM
IAN DONALDSON
external usenet poster
 
Posts: n/a
Default

G'day David.

Thanks for your interest.

I am sorry that I don't know more about tis plane, but my friend has told me
that his has the steel fuselage.

Do you know of anyone that has one of these that we might contact. This
would make things a lot easier!

Regards

Ian Donaldson


PS. You have the same name as my son in law! Coincidence or what!

David Wilson" wrote in message
...
Plans for the Horizon 2 STOL are different from those listed at the Fisher
web site. The plans they have for sale are for the all wood, shorter wing
version. I don't think they support the other. I don't know how may kits
were sold for the STOL version but the one Mike Fisher had on display at
Oshkosh had a steel square tube fuselage and more wingspan than the wooden
version.

David Wilson
N203ED
Fisher Horizon 2




  #5  
Old May 26th 22, 04:10 PM
Aserpe Aserpe is offline
Junior Member
 
First recorded activity by AviationBanter: May 2022
Location: Harrisburg
Posts: 1
Default

Quote:
Originally Posted by IAN DONALDSON View Post
G'day from Australia


A friend of mine has purchased a Fisher Horizon 2 STOL that was made in the
USA and imported into Australia.

The manner in which some of the construction has been done is now causing
him some concern. He has been in touch with the people that took over the
factory, but he has not had the courtesy of any replies to his emails.

Unfortunately the plane did not come with any plans and what he would like
to do is make contact with someone that has this model of Fisher so that he
can discuss his concerns with them.

Perhaps if someone has a set of plans that he could beg a loan of, borrow or
buy he would also be very pleased to hear from them.


Thanks and regards


Ian Donaldson
Hello I have the metal fuselage version plans, let me know how I can help.

Last edited by Aserpe : May 26th 22 at 04:12 PM. Reason: Misspelled
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
STOL Plans M. Home Built 52 August 4th 06 06:47 AM
QUESTION ON BUSH STOL KIT Richard Jimenez Owning 0 September 15th 03 09:20 PM
QUESTION ON BUSH STOL KIT Richard Jimenez Aviation Marketplace 0 September 11th 03 10:28 PM
QUESTION ON BUSH STOL KIT Richard Jimenez Owning 0 September 10th 03 04:06 PM
Question on Bush STOL kit MikeM Owning 0 September 7th 03 03:54 AM


All times are GMT +1. The time now is 04:16 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2004-2022 AviationBanter.
The comments are property of their posters.