Finding German Spec Rivet replacement
I need to replace a rivet on my canopy latch on my LS-6. It is a DIN 7338 type B (semi tubular) 6mm diameter, with 15mm length from the drawing and emailing from DG. Its the rivet that handle pivots on when pushing the aft latch pin backwards. I think I can replace it with a bolt/washer/nut combo, but it won't look as nice, and I'd like to keep things to spec as possible.
I live in the USA, so its been a challenge from some googling, to finding german spec fasteners or american equivalents for a brake lining rivet with the needed dimensions. I can purchase the rivet from manufactures but I have to buy a minimum of 1000 rivets.
I was wondering if anyone had a source to buy a much more manageable amount of rivets, or if someone has found a good solution to a replacement since its the same latch used on LS-6/7/8.
Of course if someone has some extras around, I'd be happy purchase a couple and pay for shipping.
I understand the DG tax, and even if it was free, it still be a pain to get a replacement from DG since one rivet isn't close to their minimum for shipping something, for obvious reasons.
|