Hello, On an O200 nose, we can see four threaded holes 1/4-20. I have a bad copy of the drawing I read 1-7/8 from center line horizontaly and 1-5/8 from center line verticaly. Is it true? I can't read the pilot diameter? Is someone knows it?

I am planning to fly in Monday (to Wed) and tent there on EAA campground. Can a camping spot be shared by two+ tents? Anybody interested contact me: http://www.abri.com/sq2000

New this year at Nuvite! Get FREE sample when you ask for RON

Hello All, This question is regarding Canadian regulatory issue with importing a Halon fire extinguisher. I'm building an RV and am considering fire extinguisher options. Was about to buy a Halon 1211 2lb fire extinguisher on ebay until I looked up the legalities of importing it to Canada. Seems...

Current thinking ... Tooele UT (pronounce Too-willuh) is a good cheap ($2.90) gas stop and Rawlins WY is a good overnight stop (Day's Inn gives a $60 price to pilots) but is a little high on fuel. ($3.43). The first on-course reliable autogas stop between California and IOW is Audubon IA. I...

THis will be my first year making the treck to Oshkosh. I am a non-pilot that is getting the bug again. What are absolute "must see's" Thanks

Is there a company that makes a helmet that will allow you to wear a David Clark headset inside of it? TIA -- Turbo Tiger

When my Narco died a couple of months ago, I decided to try to flush-mount an ICOM IC-A5 handheld into the panel as a replacement. Here's a picture of the result: http://www.wanttaja.com/hhrad2.JPG The A5 has up-down buttons on the front, and a dial control on the top. The functions of these...

Can anyone tell me what I should torque the hub to on my A-75 (the retaining piece that threads onto the engine crank)? I've searched the continental engine manual and can't find this value. Also, since there is no nut or bolt on this piece, is there an easy way to make an adapter that will allow...

Anyone else using this routing? We'll be leaving MGW around 7:30-8:00AM on the 24th. One stop in IN.

I need to buy a budget priced rivet gun (for solids). I just want to spend enough to get a gun that is sufficient to see me through a project. i.e. it just needs to work and do a good job of setting the rivets. I am not riveting B747's on the production line. What is good and what is bad ? I see...

I'm looking at an older single seat Zenair with a 1835cc VW, but no starter. It does have an alternator. Is it possible, and if so, how big of a deal to add a starter? I'm not a big fan of hand proping... Thanks

First of all, sorry for crosspost, but I need very good and adequate answer. This is the first time I write on these newsgroups, sorry on my bad english.Because in croatian Internet web pages or gruops has nothing on this issue, I hope that you will help me! I'm a fan of machines, first of all...

For all you guys and gals en route to Oshkosh, stop in Iowa City (KIOW) this Saturday for gas and a FREE pool party at our aviation theme suite hotel, the Alexis Park Inn & Suites! We are located adjacent to the Iowa City Municipal Airport, so stop by for lunch or dinner -- or stay the night! ...

July 11, 2005 - Aviation and the air show community suffered a tragic loss on Sunday, as Jim Franklin and Bobby Younkin died when their airplanes collided during an air show performance in Moose Jaw, Saskatchewan. "This is a tragic loss, as it is anytime this happens in the air show community,...

I currently have a single Nav radio w/GS connected to a nav antenna via a triplex coupler with 2 Nav and one GS output, and I have one Nav output from the coupler that is not being used now. I want to add another Nav radio w/GS to my plane. I can use the extra Nav output from my existing coupler...

Delete Morgan County UT and Chreighton NE from the mogas list. Jim

Ok, here goes... About 2 years ago I had a chance to buy some small radial engines at a car show, there were perhaps 25-36 inches accross, I cant remeber, I had a chance to buy em at $40 each and there were 10 or so in various states of disrepair, but since I had spent all my money alloted by...

Proposal for a future (helicopter) engine... 2-stroke diesel 2500cc two cylinder 45 degree V (120-150hp) air cooled (cowlings) common rail direct injection (high pressure) supercharged (Whipple fixed displacement max. 25 psi twin-screw) piston ported (or with LIM-type intake valve) Links...

3 more days of work...haul my camper to Osh, mark my territory at camp Scholler, drive back down to a company quarterly meeting, and drive back up...then I can enjoy OSH! (thats about 6 hours driving, 2 round trips...) John