Rocky,
Thanks for your comment on the UH-12. I'm sorry I can't say where I
saw the post, I've been to hundreds of sites looking for info. on the
Hillers. I had a chance to fly in one a couple years ago, and was
surprised at the vibration, but it smoothed out moderately well in
cruise. I have since gained a few hours training in the R-22, and
after 12 hours we are out in the patern, and I have just had an
autorotation demonstrated. The Robbie is much smoother, and faster,
and I get the impression that they are less maintainance intensive. Of
course the only ships in my area available for training are the R-22's
and Schweitzer 300's. I considering buying a ship of some kind for
building hours, and am trying to assemble info. on what would be my
best bet, both from an operational and maint. perspective. Cost is not
the primary concern, but is quite important.
Another ship I am really curious about is the Brantley B2B. I talked
at length to a man about them at the HAI convention in Orlando last
year, and left with a favorable impresssion of them. Unfortunately,
there is little info. that I am able to find on them, other than from
the factory web site, so I am combing the web looking for that, also.
I am really interested in helo's, but am afraid that at 53, I do not
have the time it will take to log enough hours to become employable.
Nevertheless, I am trying to figure a way to get in the air. Again,
thanks for your reply. every little bit helps.
Gary
(Rocky) wrote in message . com...
(Gary) wrote in message om...
Try http://www.hilleraircraft.com/ There is info on the c and e
models.e
by the way, can anyone comment on the safety record on the c and e
models? I have always ben under the impression that they were great
ships, yet recently I saw a post naming the "Hiller killer", and
wondered if there is a basis for this charge, and if so, what is the
basis for the comment?
Hi Gary
I sure don't know of the source of that bad rep but doubt they are
experienced in either model! I've used the 12C & E and ET in thousands
of hours crop spraying/dusting with no problem. Of course I've had the
normal mechanical problems that are endemic to all helicopters but
certainly nothing specific to the Hillers. They are a hard working
machine and take a lot of abuse before they give you major problems.
Can you reference the "Hiller Killer" post so I can go stir the pot in
support of the Hiller?
Thanks
Ol Shy & Bashful 8,000+ hrs helicopters