Andy,

When you say that the slow alarm was interfering with the vario, do you
mean that it tended to make the vario sound intermittent? If so, that
IS the slow alarm. The slow alarm is not a siren as you might think,
but it simply interrupts the vario audio so one might easily think that
they have a problem with their vario audio until they find out it's a
"feature not a bug".

Same thing happened to me by the way.

Mark

Andy Durbin wrote:
I upgraded my 302 firmware before going to Hobbs. It appeared to
delete all logs.

Suggest you try a different utility version, or a PDA transfer, before
you change the firmware. When you have recovered the logs then
upgrade the firmware.

Cambridge has been doing a poor job of advising customers what has
changed in each firmware version. I have asked for change information
but have not received any. I upgraded to fix a ballast transfer
problem and found I introduced a new problem with the slow alarm
interfering with the vario. (that was fixed by setting the slow alarm
threshold to a very low value)

They have been responsive to specific questions so I suggest you try
to contact them.

Andy (GY)


(Jason Armistead) wrote in message . com...

Hi

Our 302 unit with V2.50 firmware in it will not transfer Flight Logs
after
bombing out mid-way on a previous transfer.

I am using a Windows 2000 PC with Utility V2.55, which has previously
downloaded logs without any trouble.

Now, when I click on the button to start the transfer, it does not
display
any logs to choose from. Instead, there is an error dialog box, which
says "300_Utility_PC255" on the title bar, and says "Could not get
FAT.(A)"
and an "OK" button

I have tried restarting the PC Utility software to no avail. I also
tried
switching off the 302 and then recycling the battery power to it.
Still, it
doesn't work.

I can use the other buttons on the PC Utility main menu to transfer
the 302's
Glider ID and Polar and Instrument Settings OK, so it *IS*
communicating. It
also seems to be working correctly as a vario, etc, though it hasn't
been
flown since that time (perhaps when it starts to write a new log it'll
clear
the old one).

Can anyone please advise what course of action I should take, or some
remedial
steps I should try.

I *DO NOT* want to lose the flight logs (there are 107 of them in
there, per
my efforts BEFORE it bombed)

Perhaps this issue is fixed by later firmware ? The CAI web site only
shows the release notes for the very latest V2.63 firmware. Is there
a set of
cumulative firmware change logs kept somewhere ? That's very useful
if a user
needs to "skip" a few versions.

Does upgrading the firmware cause the logs to be cleared ? (I don't
want
this to happen if at all possible)

I look forward to help from anyone out there that may be able to
assist with this problem

Thanks in advance

Jason