My experience is that it works, especially on days with very low humidity,
but no boomers and only low.
I'am talking about small shallow ponds in dry area's especially when the
ponds are surrounded by sandy grounds with higher vegetation like trees. The
buoyancy impuls from the evaporated water is apparently just good enough to
start the thermal which then sucks air from its heated up vicinity.
Has saved me many times when I was still flying my Pik20D or more recently
my DG800S.
Karel, NL
V-2cxT
"Mike Rapoport" schreef in bericht
ink.net...
"K.P. Termaat" wrote in message
...
Thanks Larry for your interesting respons with your links to the
articles.
Talking about a drain and water brings me to the idea of telling that
when
low and looking for a thermal I always try to locate small ponds in dry
areas. It looks to me that the water vapor rising from these ponds is an
excellent means of starting a thermal. Water vapor is lighter then air,
so
it increases the boyancy of the air over the pond and off it goes.
Starting
at about ground level, circling to the right may then generally be the
better option. Any experience with this Larry?
Karel, NL
You will find less lift over water of any kind, even if it is contained in
vegetation. The best lift is always over the highest, dryest, darkest
surface around. The water vapor idea is...well...it is hard to find a
place
to start...but it won't work
Mike
MU-2
|