On Fri, 17 Mar 2006 02:06:36 GMT, UltraJohn
wrote:


My goal is to get the access slots straight, square, true, with
radiused corners so they will look like who ever did them knew what he
was doing.

Roger Halstead (K8RI & ARRL life member)
(N833R, S# CD-2 Worlds oldest Debonair)
"Roger" wrote

Oh you mean your trying to deceive! ;-)

Certainly! :-))

If I have to resort to jigs, machine tools, and plain old technology
to replace skill, I'll do so in a second...IF it's within my financial
means to do so.

Every one, or at least those who follow the directions just close the
elevators, horizontal stab, ailerons, and flaps on a flat table and
use weights. I weld up fixtures to hold things straight and then
clamp them together. Of course if I get too enthusiastic with the
clamps I could end up with very thin elevators.

Clamps are at the bottom row on the page.
http://www.rogerhalstead.com/G3_file.../glasair12.htm
except something seems to have gone wrong with the page and I can see
the photos for the bottom third. Looks like I'm going to have to call
the ISP as I've not changed anything. I probably just need to reload
some *stuff*.

Oh, to heck with it. I think I'll go to the airport and play.

Roger Halstead (K8RI & ARRL life member)
(N833R, S# CD-2 Worlds oldest Debonair)
www.rogerhalstead.com

John