JPH wrote:
Sam Spade wrote:

Sam Spade wrote:

FAA Order 8260.19C, "Flight Procedures and Airspace," Paragraph
852(d) (1):

(1) Fix altitudes established on ILS for
LOC-only use should be coincident with the glide slope
when possible. Where the fix altitude is not within
feet of the glide slope, annotate it for LOC use as
follows:

MIN ALT CAROL 1600*
*LOC only

NOTE: This notation is not used when the
nonprecision FAF altitude is the same as GS
intercept altitude.



should read "not within 20 feet..."


This is the current criteria as clarified by change 1 in 1998. It was
different before then.

Here is what is said in the original issuance of 8260.19C, dated 9/16/93
( Page 8-11, Paragraph 811 d.):

(1) Fix altitudes established on ILS for LOC-only should be coincident
with the glide slope when possible. Where the stepdown fix altitude is
not within 20 feet of the glide slope, annotate it for LOC use as follows:

MIN ALT CAROL 1600^
*LOC ONLY

This is the same as it reads today, for all practical purposes.

Can you cite the language that changed this for some period between late
1993 and 1998?