View Single Post
  #8  
Old November 24th 06, 10:14 PM posted to rec.aviation.piloting
Jim Macklin
external usenet poster
 
Posts: 2,070
Default Input jack on a Baron

If you look at the panel for the Eclipse 500, you will see
the keyboard mounts
http://www.eclipseaviation.com/eclip...ght_deck.html#





"Steve Foley" wrote in message
...
| "Greg Farris" wrote in message
| ...
| In article
.com,
| says...
|
|
| Stuff $100 bills into the CD Drive and fuel comes out
the USB port?
|
|
| The cemeteries of the US are overflowing with the
corpses of dangerous
| pilots like yourself! The Baron is too old to have a
USB port - they
| certainly had their keyboards connected through RS-232
serial ports. I
| have designed many such aircraft, and I must say I would
feel a lot safer
| if I didn't have to share the skies with people like
you. Your attitude
| shows you have little respect for the truth.
|
|
| You are correct. The correct procedure is to use a
Sinclair ZX-81, enter the
| program, and save it to tape. If you'll notice, this uses
the same 1/8" jack
| as the line-in or music-in on your intercom.
|
| If you don't have a newer intercom, you'll need to enter
the commands four
| bits at a time using the Fuel Pump, Nav lights, landing
light, rotating
| beacon switches. ( see
http://home.att.net/~n6480r/IMG_1340.JPG )
|
| When you have the correct arrangements of switches,
depress the starter
| button.
|
|