View Single Post
  #4  
Old March 7th 10, 03:22 PM
ChrisPA17 ChrisPA17 is offline
Junior Member
 
First recorded activity by AviationBanter: Mar 2010
Posts: 2
Default

Quote:
Originally Posted by Smota View Post
I have a Becker AR 3201 and it don't turns on. I know the radio has an internal fuse but i don't know where. In the Installation Manual i only found the wiring connection diagram. Anybody knows where can i found maintenance and repair manual, so i can see the several components of the radio? Thank you. Best regards from Portugal.
The internal fuse in the AR3201 is located next to the big coil on the board near to where the power comes into the radio. The fuse is rated at 5 Amps, and my fuse has the lettering 5A on the side. The fuse is mounted horizontally and spaced a little above the board (all other components are mounted vertically).

The fuse is a PICO and you can buy them on eBay for about 0.4 Euro. You do not have to dismantle the board from the radio to replace the fuse, but you can just solder the new fuse to the legs of the old fuse. This is easier for you and less danger to the board.

Last edited by ChrisPA17 : March 10th 10 at 04:27 PM. Reason: Previous posting was not correct.