On Tuesday, May 24, 2016 at 2:00:05 PM UTC-4, kirk.stant wrote:
On Monday, May 23, 2016 at 8:26:08 PM UTC-5, AS wrote:
Has anyone out there ever used the Flarm-core's GPS-out signal coming from the 9pin subD plug to pipe it into an SN10b? If so, what kind of a connector did you use?
I just don't want to run yet another GPS-engine if the signal is available already but not used.
Thanks,
Uli

I've been using my PF to drive my SN10 and Oudie for several years now with no problems. Use a cable from Cumulus designed for it; not cheap but worth it.

PF provides both GPS and Flarm info to SN10 and Oudie, SN10 provides vario and winds to Oudie, Oudie has backup GPS in case PF fails. SN10 can declare task to PF if desired, too.

In my opinion, anyone looking for a budget flight computer/vario should snap up one of the used SN10s - until you get into the uber-glass cockpit displays, they are hard to beat for ease of use.

Kirk
66


In my opinion, anyone looking for a budget flight computer/vario should snap up one of the used SN10s - until you get into the uber-glass cockpit displays, they are hard to beat for ease of use

Couldn't agree more! I like it a lot.

Uli