View Single Post
  #2  
Old November 19th 03, 12:37 AM
David Megginson
external usenet poster
 
Posts: n/a
Default

Ben Jackson wrote:

My ADF (Narco 841) quit pointing shortly after I got the plane, so
I pulled it and found it was covered in swarf (metal shavings) so I
cleaned it off, cleaned the contacts (card edge connector) and put
it back in. Now it points again. What I'm wondering is: How fast
should it point? Let's say there's nothing on freq 200 (default)
and I tune a nearby NDB/marker on standby and hit swap. How fast
should the needle point? I realize that in flight it doesn't have
much call to move quickly, but until now I was never paying attention.


I have the Narco ADF 841 in my Warrior. I don't like it nearly as much
as the Bendix-King ADF. When I had the indicator in at the instrument
shop for cleaning and testing, they told me that it uses a funny
mechanism with magnets.

With a strong signal, the needle points fairly quickly; with a weak one,
it takes its sweet time. It both cases, it's slower than others.


All the best,


David