Benchtops & Shelving

One thing that works very well are Formica kitchen counter tops. Find a
counter top place that removes old tops and you can get them fairly cheap.
They also may have some mistakes or customer rejections with wrong color
and dimensions that they will sell just to get rid of them.


"Jim Weir" wrote in message
...
Oooookay, let me try again.

What NONLUMBER bench tops have you ever seen or considered that might
work?

I'm not making 747s, fellers, nor am I building spars. The worst I might
want
to do is bend up a 4" x 6" bracket out of 5052H32 and drill it with a
Harbor
Freight benchtop drill press.

Jim



Jim Weir
shared these priceless pearls of wisdom:

-However, since I'm going to a new method of framing, I'd like thoughts
on what
-you have used as workbench/shelving materials. The benches will be
about 2'
-wide and 6' long. Yes, I know, solid moulded Teflon would be best, but
quick
-and cheap is high on the list of attributes I'm looking for.
-
-Thoughts appreciated.


Jim Weir (A&P/IA, CFI, & other good alphabet soup)
VP Eng RST Pres. Cyberchapter EAA Tech. Counselor
http://www.rst-engr.com