A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Owning
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

auxiliary heat



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old October 18th 04, 09:57 PM
external usenet poster
 
Posts: n/a
Default

I'm assuming you mean for seat heat, and not space heat? It's awfully
difficult to get much heat out of 14V. Even automotive folks (with a fairly sealed
cabin) do very minimal heating on very localized areas (read: arse). It might be
doable, but only for localized/concentrated situations (seat heat, blankets, etc).

Imagine getting cabin heat from a hair dryer... 1250-1500W... around 100A for
14v.

-Cory

Jim Burns wrote:
: Does anyone in the group use a 12v auxiliary heater or heated blanket for
: added cabin or passenger heat? I've seen that they come in 150watt/12.5 amp
: and 300watt/ 30amp versions. We'd have to figure out the current load on
: our alternators but I'm wondering if we should even consider such an option
: for the rear seat passengers in our Aztec. I've seen this quesion asked
: before but it's been several years.

: Jim


: ---
: Outgoing mail is certified Virus Free.
: Checked by AVG anti-virus system (http://www.grisoft.com).
: Version: 6.0.775 / Virus Database: 522 - Release Date: 10/8/2004



--

************************************************** ***********************
* Cory Papenfuss *
* Electrical Engineering candidate Ph.D. graduate student *
* Virginia Polytechnic Institute and State University *
************************************************** ***********************

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Any metallurgist's on the group, I want to heat treat aluminum? [email protected] Home Built 3 December 11th 04 12:50 PM
Carb heat specs? Rich S. Home Built 2 November 13th 04 05:39 PM
Painting and air cooled motor? CitizenX Home Built 5 June 30th 04 01:47 PM
Inside the Cowling Fire / Heat Detector? George Sconyers Owning 5 May 30th 04 08:04 PM
pitot heat question K. Ari Krupnikov Instrument Flight Rules 7 December 11th 03 02:51 AM


All times are GMT +1. The time now is 12:57 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AviationBanter.
The comments are property of their posters.