A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Home Built
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

homemade EFIS system and EMI



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #31  
Old February 22nd 05, 03:07 AM
UltraJohn
external usenet poster
 
Posts: n/a
Default

Evan Carew wrote:

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

JC,

For what its worth, the previously described PC104 486 based system was
used by my company to controll a filter system & write to an X display
at the same time running Linux. That system only had 128MB of RAM & that
might have been too much. All applications ran from RAM.


Good points Evan. A lot can be done if you set up a custom system. Up until
I switch to an AMD 64 bit system I ran slackware in which you can select
indiviual packages to install. You could get a very small system if you
wanted. Stick to on editor one window system and a custom kernel and you
can get a rather complete system pretty small.
Take a look at most 'Boxed' systems under /bin /sbin /usr/bin and /usr/sbin
and you will see a lot of programs that you will never use!
John

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 12:28 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AviationBanter.
The comments are property of their posters.