A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Instrument Flight Rules
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Hold "as published"?



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old September 17th 03, 10:34 PM
John Clonts
external usenet poster
 
Posts: n/a
Default Hold "as published"?

Flying to Burnet, Texas (BMQ) the other day:

"Houston Center, 7nz request vectors-to-final Burnet GPS-01, or else request
direct JIBAJ for the GPS-19"

"7nz, you're number three, cleared direct Burnet, expect further clearance
2125"
....
I didn't understand what he was telling me to do once I got there.
....
About 5 miles from Burnet:

"Center, 7nz, unclear my instructions when I get to Burnet"

"7nz, fly the hold as published"

I read that back, but then looked on my enroute, and there was no hold. I
looked on my approach plates (GPS-1 and GPS-19) and there was no hold there.
By this time I'm just about to crossing KBMQ.

"Center, 7nz, sorry I see no published hold"

"7nz, sigh then fly heading 270, vectors to Burnet"

I then eventually flew one missed approach (GPS-19) then a successful
approach (GPS-1).

Afterwards it dawned on me that the published hold that he was talking about
was the hold depicted on the BMQ NDB-1 approach plate. The NDB is on the
field, but my mind had been in "gps" mode since I don't have ADF in this
plane.

So my question (finally!) is: was that proper of Center to assign me that
hold "as published"?

Cheers,
John Clonts
Temple, Texas
N7NZ


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
AOPA Stall/Spin Study -- Stowell's Review (8,000 words) Rich Stowell Aerobatics 28 January 2nd 09 02:26 PM
Screw hold repair in fabric? Brian Huffaker Home Built 11 May 29th 04 02:07 AM
Need Hold Harmless Waver for Ultralight or Experimental Sale Larry Smith Home Built 9 August 19th 03 02:47 AM
Need a Waiver/ Hold Harmless Agreement for UL / Experimental Sale Richard_Tonry Home Built 2 August 17th 03 12:58 PM


All times are GMT +1. The time now is 02:44 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.