A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Home Built
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Canard static port location

Thread Tools Display Modes
Old July 12th 03, 01:16 AM
Paul Lee
external usenet poster
Posts: n/a
Default Canard static port location

Where do you canard owners locate your static pressure ports?

The SQ2000 has a handy spot for the ram air pitot port at the front.
But where would be a good place for static port. The SQ2000 fus.
tapers evenly until it reaches the door - where the body is parallel
to wind.

Paul Lee ...
Old July 12th 03, 02:55 AM
external usenet poster
Posts: n/a

"Paul Lee" wrote in message
Where do you canard owners locate your static pressure ports?

My static port on my Long is just aft of the canard TE in the middle of the
fuse on the left side. This makes it real convenient for the instrument
panel. However, at that point, my port is perpendicular to the relative

Before I reworked the plumbing, my tubing was not connected to the static
port. I noticed this because I could gain or lose 50 feet altitude
depending on if my air vent was opened or closed.



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT +1. The time now is 05:41 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2023, Jelsoft Enterprises Ltd.
Copyright 2004-2023 AviationBanter.
The comments are property of their posters.