A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Home Built
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

buying sheet aluminum



 
 
Thread Tools Display Modes
  #1  
Old August 21st 07, 01:05 AM posted to rec.aviation.homebuilt
[email protected]
external usenet poster
 
Posts: 7
Default buying sheet aluminum

I am in need of a 5'x6' sheet of 2024T3, 0.025". Most of what I find
available through the likes of Aircraft SPruce is only in 4' wide
stock.

Anyone with any leads on where in North America I can purchase. I
recall seeing an advertisement in Trade a Plane with a lady inside a
rolled up tube of aluminum sheet, but cannot find the ad anymore.

Thanks in advance

Mike

  #2  
Old August 21st 07, 01:28 AM posted to rec.aviation.homebuilt
Bob Kuykendall
external usenet poster
 
Posts: 1,345
Default buying sheet aluminum

On Aug 20, 5:05 pm, wrote:
I am in need of a 5'x6' sheet of 2024T3, 0.025".


I have some 5'x12' sheets 2024-T3 alclad, $200 ea, full sheets only.

Bob K.

  #3  
Old August 21st 07, 01:33 AM posted to rec.aviation.homebuilt
Bob Kuykendall
external usenet poster
 
Posts: 1,345
Default buying sheet aluminum

On Aug 20, 5:05 pm, wrote:

I recall seeing an advertisement in Trade a Plane
with a lady inside a rolled up tube of aluminum
sheet, but cannot find the ad anymore.


That's Airparts, Inc:

http://www.airpartsinc.com/

They have standard 4' coil, and a lot of other good stuff. Good
prices, good service.

Thanks, Bob K.

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
aluminum rib, aluminum spar, holes drilled but screws broken off jls Home Built 13 January 3rd 07 09:06 AM
Storing sheet materials (aluminum, plywood, etc.) in your workshop H_Zwakenberg Home Built 0 December 16th 06 12:54 PM
Performance Comparison Sheet Ed Baker Home Built 6 December 2nd 04 03:14 AM
4130 sheet log Home Built 4 September 1st 04 01:42 AM
Sheet metal "Nibbler" Nolaminar Home Built 3 January 24th 04 07:05 AM


All times are GMT +1. The time now is 11:40 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.