"Gord Beaman" wrote in message
...
"Dudley Henriques" wrote:


"Gord Beaman" wrote in message
news
"Dudley Henriques" wrote:


I'll merely state that not once in my 26 years in the military
have I ever heard anyone call anyone a 'flyboy' with other than
derision in mind. Not once. Derision only. Sorry.

-Gord.

I take it that after we delete the unnecessary and unfortunately
predictable
vitriol, we have an opposing opinion here.

Vitriol?...God, you've lived a very sheltered life haven't
you?...

Not really, but fairly well educated...at least enough to know that
vitriol
is defined as sharp or caustic speech or writing, such as your opening
lines
to me below....you know, the stuff you "didn't include in your quote
pickup
here :-)

I find it amazing that you could say that, Of course you've
amazed me before so I shouldn't be surprised I guess. I suppose I
shouldn't knock your misinterpetation here because you're
speaking from almost zero experience aren't you?. That shouldn't
surprise me by now either I guess.

Yup! That's vitriol, sheltered or unsheltered. :-)


"Bull ****! This is a constant speed prop. RPM is a
set value. The RPM can be set at 3000 and the
manifold pressure can be anywhere between 15 inches
and 61 inches, and it's the manifold pressure
combined with the set RPM that will determine the
power.....NOT the RPM!!! Are you trying to tell
me that the rotational (energy) of a propeller is
the same at 15 inches as it is at 61?".
-D Henriques



Oh God!!...my ribs!...my ribs!!

I would have given a lot to have been a fly on your wall when you
saw your error here!

(I suppose you'll say that you included that on purpose?) sigh

You really should cut your losses and quit this before you make
any more of a fool of yourself dud old chappie

-Gord.

I'm changing my mind about you Beamon. You actually might be this stupid.
That was no error. I've decided that I'm going to include this in every post
I answer from you just to illustrate to you how totally idiotic and stupid
you actually are by posting it yourself.
Let me clue you in on something old buddy. The quote is correct. You made a
mistake when you barged in on the seizure thread ranting on about power. You
completely forgot the rpm limiter didn't you? Hell Beamon, I know you know
about propellers. The problem is simply that you're an ass hole. You
couldn't resist trying to nail me, and you were totally wrong. The statement
stands. In fact, it stands scrutiny so well that I have no problem at all
using it as my own signature on any post I answer from you.
Here, take a good look below. It's no mistake. I'll discuss this quote with
anyone who cares to discuss it......even you Beamon.
Here's your "mistake";
DUDLEY HENRIQUES SAID ;

"Bull ****! This is a constant speed prop. RPM is a
set value. The RPM can be set at 3000 and the
manifold pressure can be anywhere between 15 inches
and 61 inches, and it's the manifold pressure
combined with the set RPM that will determine the
power.....NOT the RPM!!! Are you trying to tell
me that the rotational (energy) of a propeller is
the same at 15 inches as it is at 61?".
-D Henriques

How's that Gordo? Do me a favor. Go read up on constant speed prop governor
rpm limiters for the 24D50 Hamilton ; then come back and I'll give you
another lesson; or post your usual personal attack tripe that skirts an
issue entirely. :-)
Dudley Henriques
International Fighter Pilots Fellowship
Commercial Pilot/ CFI Retired
For personal email, please replace
the z's with e's.
dhenriquesATzarthlinkDOTnzt