"Bertie the Bunyip" wrote in message
...
"Ken S. Tucker" wrote in news:94016f66-e3ab-
:

On Jun 1, 11:48 am, wrote:
On Jun 1, 4:35 am, Tina wrote:



The Mooney 201 has a ram air port, a half a foot under the prop
spinner. The POH tells us it can be opened at altitude for a very
modest increase in MP and we find maybe a half inch increase in
pressure. The idea of the thing is, if the port is looking right at
the air being thrust toward it by the prop (it can't be more than 6
inches or so behind it) as well as the air impact from the
airplane's
motion the air being 'rammed' into it should effectively lower the
altitude the engine thinks it's at. Well, a half inch of Hg is
about
500 feet or so. The question is, though, wouldn't you think there
would be a way to capture a great deal more of the ram air effect
and
really boost the engine performance? Who wouldn't like to fly at 24
square at 12000 feet without a turbo charger?

What makes me wonder about it is, even at 60 mph holding your hand
out
of the window of a car subjects it to a significant backward
pressure,
so the energy must be there.

The energy is there but it's no bigger than what Mooney claims.
Flat-plate drag at 100 knots is 29 pounds; dicide that by 144 square
inches and get around 0.2 psi, or about 0.4" Hg. Not much. AT 200
knots it will be four times that, which still isn't a lot.
In the 1970's Ford sold some cars with "Ram-Air Induction"
systems. A scoop mounted on the carb that stuck out above the hood,
to
ram vast volumes of air into the carb and get way more horsepower.
That's what they wanted you to believe. At 60 mph the pressure
recovery would have been laughably tiny, but Ford's profits were
impressive.

That was the good old days!
A jig saw and some sheet metal BLASTED your 427 cube
inch engine to over 600 hp!!!, and at 400-500 mph, you'd be
economizing on fuel to boot!.
Ken


































































































































































You're clueless.