![]() |
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
|
Just wondering if anyone has a good estimate on the empty weight of an Eberle clamshell trailer (Labelle).
ray |
|
#2
|
|||
|
|||
|
On Nov 25, 12:50*pm, raymond herr raymond.herr.
wrote: Just wondering if anyone has a good estimate on the empty weight of an Eberle clamshell trailer (Labelle). ray -- raymond herr Hello Ray, if it is an original Eberle trailer, there should be a stainless steel tag somewhere on the frame calling out the empty and max gross weight in kg. Multiply by 2.2 to get lbs. Uli |
|
#3
|
|||
|
|||
|
According the factorybrochure the empty weight was 925 lbs
Hans Disma "raymond herr" schreef in bericht ... Just wondering if anyone has a good estimate on the empty weight of an Eberle clamshell trailer (Labelle). ray -- raymond herr |
|
#4
|
|||
|
|||
|
On Nov 25, 9:50*am, raymond herr raymond.herr.
wrote: Just wondering if anyone has a good estimate on the empty weight of an Eberle clamshell trailer (Labelle). ray -- raymond herr Max wt for the axle is 1000kg or 2200 lbs, as I recall my old Standard Cirrus weighed about 500 lbs empty. That trailer should be about 1200 lbs. without gear with spare tire. |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Eberle trailer wheel rims | Bob | Soaring | 7 | November 25th 11 06:39 PM |
| Typical glider & trailer total weight? | Roger Worden[_2_] | Soaring | 9 | February 8th 10 03:24 AM |
| Trailer Weight | rlovinggood | Soaring | 8 | November 1st 07 01:22 AM |
| Glider Weight/Wing Loading and determing speed for best L/D for a given weight | 65E | Soaring | 3 | January 26th 06 10:26 PM |
| Eberle Surge Brake Rebuild | Jim Hendrix | Soaring | 0 | June 18th 04 09:28 PM |