1981 Cobra trailer gas struts

On Friday, December 13, 2019 at 4:54:33 AM UTC-8, David Cleveland wrote:
I have a 1981 Cobra trailer designed for a single seat glider. The trailer design is of the type that has the struts located on the outside of the trailer, with an aluminum top. I am looking to replace the gas struts.

I have contacted Wings and Wheels. They have been very helpful, but they do not carry the struts for this design. They also mentioned that Spindelberger/Cobra do not carry the item.

I am looking for two things. My struts were painted in the past, so I am unable to get the read the strength of the strut. I am also looking for a recommendation for replacement or refurbish.

Thanks

David Cleveland
Salt Lake City

To me replacement seems easiest.
Open the trailer once with bad struts, close it with good ones the same day.
Do it with the assistance of a hoist if possible. It's easier to access everything and generally less unnerving if the glider is out.
Believe Ralf is the parts contact, but yes, Alfred and Agnes can bring some small parts to the convention. They are a pleasure to deal with.
rdiestertich cobratrailer com
Jim