![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#15
|
|||
|
|||
![]()
Greg Esres wrote:
To me the question is how to give a student a criteria for leading turns on an instrument approach. I can't tell from TERPS whether this was ever intended; it does suggest that the framers assumed that navaids would be flown over, rather than by. I think that assumption was based on how most navaids work. You don't really know you're over a VOR until you get a full TO/FROM flip. Even with DME, slant range makes it pretty difficult to calculate leads for turns. You're at 9000 MSL, the elevation of the VORTAC isn't even published, but you can guess it's about 1000 MSL, your true airspeed is 170 kts, you've got a 30 kt left-quartering tailwind, and you need to make a 70 degree turn to the right; quick, at what DME readout should you start your turn? The GPS I fly with works all those numbers (OK, it doesn't know the wind, but it does know my groundspeed, and uses horizontal distance instead of slant), gives me an audible "boing" and a 10-second countdown to "turn now", and if I zoom the map in far enough, even draws me a nice magenta curved line on the screen to follow. |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Screw hold repair in fabric? | Brian Huffaker | Home Built | 11 | May 29th 04 02:07 AM |
Hold "as published"? | John Clonts | Instrument Flight Rules | 83 | November 13th 03 03:19 PM |
Random Hold Generator... | Tina Marie | Instrument Flight Rules | 0 | November 5th 03 04:21 PM |
Need Hold Harmless Waver for Ultralight or Experimental Sale | Larry Smith | Home Built | 9 | August 19th 03 02:47 AM |
Need a Waiver/ Hold Harmless Agreement for UL / Experimental Sale | Richard_Tonry | Home Built | 2 | August 17th 03 12:58 PM |