DG300 Tail weight

If you don't already have a brass tail wheel, this is another option to
move the CG back, and it is not too hard to swap in and out if needed.
On my DG-303 the DG factory brass tail wheel (probably for a DG-1000,
required a little machining to narrow it to fit into the DG-303, I'm
not sure if AMS-Flight could provide one that fitted exactly). The
tailwheel weighs somewhere around 8 pounds, I can't remember exactly.

I'm around 185lb with parachute and with all equipment on board and a
brass tail wheel the CG was back around 85% which is great for acro
(spins nicely), for cross country it is too twitchy and I ballance it
more forward with two of the standard weights in the cockpit floor
compartment.

It is nice if you find somebody with scales so you can be really sure
where the CG is if you play around with things.

Darryl
DG-303 Acro 6DX

John Schaffer wrote:
I have a DG300 that has two tubes fiberglassed into the tail along the
verticle stabilizer hinge line. These tubes are roughly 1" in diameter.
According to the book it is for tailweight. The manual does not seem to
explain how to use this feature or how to secure the weights. First
impression is a lead bar similar to the old window sash bars. But how
do you secure them so they do not move around? Thanx for any light you
can shed

John
DG300 "XLT"




--
John Schaffer