Removing flux?

On Jul 18, 6:51*pm, "Morgans" wrote:
"Michael Horowitz" wrote

I see where it says to quence in hot water; I"ll give it a try - MIke

Quenching is how it is to be rapidly cooled. *Look again to see if there is
anything about cleanup and inspection after the weld.
--
Jim in NC

I'll be following this thread. In 40 years of welding and brazing,
I've never found a GOOD way to remove the glass-like residue from
brazing flux. At one place I worked, they used bare (unfluxed) rod,
and had a flux pot between the Acetylene tank and the torch.
Interesting green flame, great fluxing action, and almost zero
residue.