A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Soaring
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Refinishing ASW24



 
 
Thread Tools Display Modes
  #1  
Old September 9th 20, 08:57 PM posted to rec.aviation.soaring
Martin Gregorie[_6_]
external usenet poster
 
Posts: 699
Default Refinishing ASW24

On Wed, 09 Sep 2020 12:49:27 -0700, wrote:

On Wednesday, September 9, 2020 at 11:40:09 AM UTC-4, Martin Gregorie
wrote:
On Wed, 09 Sep 2020 04:06:05 -0700, wrote:

On Wednesday, September 9, 2020 at 4:45:06 AM UTC-4, Colin Roney
wrote:
Rum? Can`t stand it. It`s like drinking liquid rubber. Why not try a
good Scottish single malt whisky. Your working progress will
benefit.
At 02:05 09 September 2020, Richard Pfiffner wrote:
On Tuesday, September 8, 2020 at 6:30:53 PM UTC-7,
wro=
te:
On Tuesday, September 8, 2020 at 9:14:39 PM UTC-4,

wro=
te:
Only used two boxes of band-aids on my fingers and drank two
bottles
of=
good Cuban rum.
So, can we assume that the R/B ratio of one bottle of rum to
one box
of=
Band-Aids can be used as a measure of performance? Try three
bottles of
ru=
m and report back with the results. If you end up needing a
tourniquet, ple=
ase let us know.
Mark, the ratio is consistent with the measure of pain! I liken
this
orde=
al to a couple of other projects that I have tackled in the past, I
basical=
ly said to myself ,"What the hell did I do this for". The
tourniquet sugges=
tion is a great idea, not sure that it would stop the flow, but
certainly w=
ould prolong the suffering.=20
On to the next step in this ordeal, will be building back up with
filler
=
and primer and on to the final coat or two or three of acrylic
urethane the=
n sanding down to 3000 grit and buffing, I might need more rum.

If a low number grit does not easily take off the hard finish use a
finer g=
rit until it cuts easily then move to a 80 or 65 grit. An electric
grinder=
with adjustable speed is what I have used. In my opinion an
orbital is
no=
t needed. Use no pressure on the sander let the paper cut.

http://www.craggyaero.com/ventus.htm

Richard www.craggyaero.com

Thanks for the suggestion Colin, I could never forgive myself for
drinking Scottish Whiskey, I would be contributing to the Kennedy
dynasty and for that I could never forgive myself. Rum is much
better, we call it the juice of the Caribbean gods, many a pirate
sailed these blue waters while indulging it that fine roasted sugar
cane fermented nectar. I will keep your suggestion in mind just in
case the rum gets too depleted. Bob

Do the Kennedy Clan still have dibs on that post-Prohibition money-
spinner? Enquiring minds want to know.


--
Martin | martin at Gregorie | gregorie dot org

Martin, I do believe that the Kennedy clan still gets royalties on
every bottle of Scotch whiskey imported to this country. Just recently
a Kennedy was finally defeated for political office in Mass, what took
those people so long. Maybe that Kennedy could come on down and help
sand gelcoat now that he is out of work.


:-)


--
Martin | martin at
Gregorie | gregorie dot org

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
ASW24 - electric valve system Norbert Gulczynski Soaring 1 January 25th 15 01:13 PM
1998 ASW24 water bag leak where bag meets PVC valve Barny Soaring 2 April 4th 11 04:57 AM
ASW24 Left aileron needed Barny Soaring 0 October 18th 10 12:09 AM
Looking to Purchase used ASW24 Right Aileron Robert Fidler Soaring 0 August 3rd 07 09:11 PM
Waterbags for the ASW24 Udo Rumpf Soaring 0 October 4th 03 03:54 PM


All times are GMT +1. The time now is 10:23 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AviationBanter.
The comments are property of their posters.