A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Owning
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

KX-155 LEDs



 
 
Thread Tools Display Modes
  #1  
Old November 14th 03, 01:35 AM
Stu Gotts
external usenet poster
 
Posts: n/a
Default

Not really common knowledge and you could screw it up if you're not
careful. You need to take the actual digits out, then clean the
contacts with a good cleaner or maybe even alcohol. If they're not
bad, this will bring them back to life. It's takes a bit of patience,
but it's not brain surgery.

On Thu, 13 Nov 2003 23:03:46 GMT, "Steven Barnes"
wrote:

It's not just a couple segments, it's the whole 1st two numbers. We can
still dial a freq in, just have to count.

You can just pop the board/cover off the front? That's where the contacts
are?

Thanks. Sorry if this is common knowledge. 1st time airplane owner.


"Ron Natalie" wrote in message
om...

"Steven Barnes" wrote in message

. com...
Heh, on the way back from the avionics shop to get the IFR cert done and

a
new VOR head installed, the LEDs went out on our #1 comm (KX-155). The

first
2 digits ( 121.9, the 12 is gone). Just went out in flight. What is
involved in replacing the LEDs? Is it the whole cover?


If it's a KX-155, they are not LED's. I've heard that sometimes you can

get them back
by cleaning the contacts and reseating the display board. I've got a

couple of segments
out as well.





  #2  
Old November 17th 03, 08:34 PM
John Mireley
external usenet poster
 
Posts: n/a
Default

Stu Gotts wrote:
Not really common knowledge and you could screw it up if you're not
careful. You need to take the actual digits out, then clean the
contacts with a good cleaner or maybe even alcohol. If they're not
bad, this will bring them back to life. It's takes a bit of patience,
but it's not brain surgery.


A pencil eraser is commonly used to burnish the contacts.

John Mireley

  #3  
Old November 18th 03, 12:47 AM
Jay Masino
external usenet poster
 
Posts: n/a
Default

John Mireley wrote:
A pencil eraser is commonly used to burnish the contacts.


You need to be careful with this method, because you can actually wear
some of the gold off the contacts (and eventually make the situation
worse).

-- Jay


__!__
Jay and Teresa Masino ___(_)___
http://www2.ari.net/jmasino/ ! ! !

Checkout http://www.oc-adolfos.com/
for the best Italian food in Ocean City, MD and...
Checkout http://www.brolow.com/ for authentic Blues music on Delmarva

  #4  
Old November 18th 03, 01:55 AM
Stu Gotts
external usenet poster
 
Posts: n/a
Default

On Mon, 17 Nov 2003 15:34:43 -0500, John Mireley
wrote:

Stu Gotts wrote:
Not really common knowledge and you could screw it up if you're not
careful. You need to take the actual digits out, then clean the
contacts with a good cleaner or maybe even alcohol. If they're not
bad, this will bring them back to life. It's takes a bit of patience,
but it's not brain surgery.


A pencil eraser is commonly used to burnish the contacts.

John Mireley


Ah yes, forgot about that one!
  #5  
Old November 18th 03, 04:03 PM
Mike Z.
external usenet poster
 
Posts: n/a
Default

Try polishing with a dollar bill.

Takes the gunk away and leaves the plating where it belongs.

Mike Z


"John Mireley" wrote in message ...
Stu Gotts wrote:
Not really common knowledge and you could screw it up if you're not
careful. You need to take the actual digits out, then clean the
contacts with a good cleaner or maybe even alcohol. If they're not
bad, this will bring them back to life. It's takes a bit of patience,
but it's not brain surgery.


A pencil eraser is commonly used to burnish the contacts.

John Mireley



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
More LED's Veeduber Home Built 19 June 9th 04 10:07 PM
LED tail strobe Jeff Peterson Home Built 41 May 15th 04 03:13 PM
LEDs for Nav Lights - Jim Weir Scott Gettings Home Built 3 February 17th 04 01:53 AM
LEDs with Strobe lights pekka1510 Home Built 11 August 31st 03 11:36 PM
LEDs Morgans Home Built 6 August 19th 03 03:49 AM


All times are GMT +1. The time now is 01:06 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AviationBanter.
The comments are property of their posters.