![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
Jim Weir wrote:
Does anybody have an idea on how to make a tiny little vacuum pump on the order of an aquarium pump or so that will draw just a few inches of water? Preferably 110, but I can rig up a 12 volt supply if necessary. If you have a compressor, use a venturi vacuum generator. Harbor freight has them for about $10 from time to time. |
#2
|
|||
|
|||
![]()
Jim,
That air compressor sprayer I gave you a couple of years ago is just a venturi. Use the liquid imput end to generate the vacuum. Unless ypu lost it, you already have what you need. -- Bob (Chief Pilot, White Knuckle Airways) "John Mireley" wrote in message ... Jim Weir wrote: Does anybody have an idea on how to make a tiny little vacuum pump on the order of an aquarium pump or so that will draw just a few inches of water? Preferably 110, but I can rig up a 12 volt supply if necessary. If you have a compressor, use a venturi vacuum generator. Harbor freight has them for about $10 from time to time. |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wet vs Dry Vacuum Pump | Fastglasair | Home Built | 1 | December 15th 04 05:17 PM |
Windmilling Prop & Vacuum Pump | Matt Young | Instrument Flight Rules | 14 | October 14th 04 08:08 PM |
Remove oil seal from vacuum pump adapter on Lycoming IO320 HOW????? | Ron | Home Built | 2 | February 24th 04 04:34 PM |
Tiny vacuum pump | Jim Weir | Home Built | 41 | January 24th 04 05:42 AM |
Battery and Vacuum pump | PaulaJay1 | Owning | 3 | January 16th 04 04:22 PM |