|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
|
|
#1
July 10th 03, 01:00 AM
|
|||
|
|||
On Wed, 09 Jul 2003 16:30:47 GMT, "Hal Davey"
wrote: If I might throw $0.02 in on this. In researching heat protection I ran across this article which describes why you do not want to use wraps vs. ceramic coatings. http://www.centuryperformance.com/heatwraps.asp I agree with part of what he says, but there is no such thing as the temperature amplification he talks about. That the temperatures may be higher than the measured EGT is quite possible, but the actual temp can not exceed the input temperature, which could conceivably be too high for the header material. Roger Halstead (K8RI EN73 & ARRL Life Member) www.rogerhalstead.com N833R World's oldest Debonair? (S# CD-2) Cheers, Hal Davey 
|
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
