A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Home Built
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Aluminum instrument panel finish?



 
 
Thread Tools Display Modes
  #1  
Old February 2nd 04, 10:38 PM
Ron Natalie
external usenet poster
 
Posts: n/a
Default


"Tarver Engineering" wrote in message ...

"Marco Leon" mleon(at)optonline.net wrote in message
...
As long as he doesn't plan on selling it anytime soon...


Selling a homebuilt is not consistent with the regulatory advantages
provided to those building their own airplane, that they intend to operate.
That Authority belongs at a DAS.


More drivel. The only thing that a builder is afforded over anyone else
who owns a homebuilt is eligibility to sign off the annuals.

  #2  
Old February 2nd 04, 10:43 PM
Tarver Engineering
external usenet poster
 
Posts: n/a
Default


"Ron Natalie" wrote in message
. ..

"Tarver Engineering" wrote in message

...

"Marco Leon" mleon(at)optonline.net wrote in message
...
As long as he doesn't plan on selling it anytime soon...


Selling a homebuilt is not consistent with the regulatory advantages
provided to those building their own airplane, that they intend to

operate.
That Authority belongs at a DAS.


More drivel. The only thing that a builder is afforded over anyone else
who owns a homebuilt is eligibility to sign off the annuals.


Of course, that from Natalie, who doesn't even know a homebuilt is an
experimantal.

If you build it to sell, you are outside the regulatory intent of a
homebuilt.


  #3  
Old February 2nd 04, 10:56 PM
Ron Natalie
external usenet poster
 
Posts: n/a
Default


"Tarver Engineering" wrote in message ...
More drivel. The only thing that a builder is afforded over anyone else
who owns a homebuilt is eligibility to sign off the annuals.


Of course, that from Natalie, who doesn't even know a homebuilt is an
experimantal.

If you build it to sell, you are outside the regulatory intent of a
homebuilt.

I very much know it is certificated in "Experimental -- Amateur Built." The
only thing the rules say is that it must be CONSTRUCTED FOR EDUCATION
OR RECREATION. It doesn't say anything about what it is used for afterwards.
There is no restriction on selling homebuilts or maintaining and operating them after
they are sold.

  #4  
Old February 2nd 04, 11:03 PM
Tarver Engineering
external usenet poster
 
Posts: n/a
Default


"Ron Natalie" wrote in message
. ..

"Tarver Engineering" wrote in message

...
More drivel. The only thing that a builder is afforded over anyone

else
who owns a homebuilt is eligibility to sign off the annuals.


Of course, that from Natalie, who doesn't even know a homebuilt is an
experimantal.

If you build it to sell, you are outside the regulatory intent of a
homebuilt.

I very much know it is certificated in "Experimental


You wrote that you didn't know that, not very long ago.

Are you now claiming that I am correct and you have no businees discussing
regulatory issues, Natalie?

-- Amateur Built." The
only thing the rules say is that it must be CONSTRUCTED FOR EDUCATION
OR RECREATION. It doesn't say anything about what it is used for

afterwards.
There is no restriction on selling homebuilts or maintaining and operating

them after
they are sold.


There are several regulatory differences between homebuilts WRT
maintainance. As to building a homebuilt to sell, that alone invalidates
all that AEA has done. A DAS is required to build kit airplanes and sell
them.

Perhaps you would like to post up one of the archive trolls and remove any
doubt of your idiot status, Nesbitt?


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Aluminum vs Fiberglass landing gear - Pro's and cons. Bart Hull Home Built 1 November 24th 03 02:46 PM
Aluminum vs Fiberglass landing gear - Pro's and cons. Bart Hull Home Built 2 November 24th 03 05:23 AM
Aluminum vs Fiberglass landing gear - Pro's and cons. Bart Hull Home Built 0 November 24th 03 03:52 AM
Aluminum vs Fiberglass landing gear - Pro's and cons. Bart D. Hull Home Built 0 November 22nd 03 06:24 AM
CAD outline of Rans S6S instrument panel? Rob Turk Home Built 2 October 21st 03 09:27 PM


All times are GMT +1. The time now is 11:52 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AviationBanter.
The comments are property of their posters.