![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]() apply. The easy way to tell is to look at your Airworthiness Certificate and see how it was certified. Slight correction here. I looked on a G-IV today and the Part the aircraft was certified to was on the data plate and not the C of A. Of course, it will also be on the FAA Type Certificate for any model. For my own curiosity, I did check Type Certificates for Pipers and Cessna's. The PA-28 series are CAR 3 and the first Part 23 Piper is the PA-36. With Cessna the 150, 152 172, 177 and 207 series are part 23 as well as the 400 twins and 500 jets. The 180, 182, 210, 206, and 310 series are CAR 3. And some Cessna's are CAR 4. I guess the best thing to do would be to check the TC for your aircraft prior to doing any upholstery work to make sure you stay legal. Don Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- ** SPEED ** RETENTION ** COMPLETION ** ANONYMITY ** ---------------------------------------------------------- http://www.usenet.com |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Handheld battery question | RobsSanta | General Aviation | 8 | September 19th 04 03:07 PM |
VOR/DME Approach Question | Chip Jones | Instrument Flight Rules | 47 | August 29th 04 05:03 AM |
Phoenix AIM-54A (QUESTION) | Krztalizer | Naval Aviation | 10 | February 23rd 04 07:22 AM |
Tecumseh Engine Mounting Question | jlauer | Home Built | 7 | November 16th 03 01:51 AM |
Question about Question 4488 | [email protected] | Instrument Flight Rules | 3 | October 27th 03 01:26 AM |