![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
Ray Andraka wrote:
There are several things you can add to help with the identification, In my plane I have a low vacuum warning light (part of the precise flight backup) mounted between the AI and DG. The AI is one of the sigmatec ones with a vacuum flag, so that if vacuum is lost in the instrument but not in the system I still know about it right away. These warnings cover identification of the more common cause of loss of the AI. The other failure mode would be failure of the gyro, in which case I don't believe you get the insidious gradual spin-down like you do with loss of vacuum. Ray, I'll speak to the latter. A failing horizon gyro may not "spin down". But it can still be insidious. Example: our AI had a period where, in level flight, it would jump up and indicate a rather nose-high attitude. Fail to catch it and you'd be in a rather steep dive. Then it would go back to normal. Then jump up again....finally it broke and unmistakably started spinning in a nauseating fashion, but the "breaking" process could easily have caused a loss of control for a pilot w/out a good cross-check (our failure happened VMC) Cheers, Sydney |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Good AI backup, wish me luck | Robert M. Gary | Instrument Flight Rules | 29 | March 1st 04 05:36 PM |
Solid State Backup AI | Dan Truesdell | Instrument Flight Rules | 20 | January 15th 04 09:53 PM |
Gyros - which do you trust? | Julian Scarfe | Instrument Flight Rules | 6 | July 27th 03 09:36 AM |
Backup gyros - which do you trust? | Dan Luke | Owning | 46 | July 17th 03 08:06 PM |
Backup gyros - which do you trust? | Dan Luke | Piloting | 23 | July 17th 03 08:06 PM |